Imarflex IR-30N Bruksanvisning
Les nedenfor 📖 manual på norsk for Imarflex IR-30N (2 sider) i kategorien Stryke. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
CLEANING AND MAINTENANCE:
1. Unplug the iron after every use.
2. Make sure to allow the iron to cool down before cleaning.
3. Wipe the sole plate with soft damp clothes.
Note:
(1) Do not immerse the iron in water or any other liquids.
(2) To protect the sole plate, always store iron in heel rest
position.
REMINDER: Please do not forget to ll up and send the
warranty card with receipt to our email address
imarflexfb@evergoodinc.com
Distributed By: Evergood Unlimited Corp.
901 G.Masangkay St., Manila
Made in China
SPECIFICATION
MODEL NO. : IR- 30N
RATED VOLTAGE : 230Va.c. 60Hz
POWER : 1000 watts
BOX DIMENSION : 253*119*133mm
UNIT DIMENSION : 235*119*112mm
GROSS WEIGHT : 1.1 kg.
UNIT WEIGHT : 1 kg.
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated
corresponds with the convenience outlet (230Va.c.).
3. Do not use any appliance with a damaged cord or plug. If the
cord is damaged it should be replaced with the same type
and size or bring the unit to the nearest authorized service
center.
4. Do not leave the iron unattended while it is connected to the
convenience outlet.
5. Children should be supervised to ensure that they do not play
with the appliance.
6. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliances by a person responsible for their safety.
7. Do not use two-way socket with another appliance. a
8. To protect against electric shock, do not imm se the iron in er
water or any other liquids.
9. The iron should always be turned OFF before plugging or
unplugging from the outlet.
10. Do not allow cord to touch hot surface of the iron. Loop cord
loosely around the iron before storing.
11. Do not touch the sole plate when the unit is plugged in or
while in use. Accident may occur.
12. This appliance is not intended for outdoor use.
13. For household use only: not intended for any business
purposes.
14. Save this instruction for future reference.
DESCRIPTION OF PARTS:
HOW TO USE:
1. Plug the iron to the convenience outlet. in
2. Set Variable Temperature Control Knob to desired fabric
temperature. (See the Fabric Guide for the appropriate
fabric temperature in the unit.)
3. Allow the iron to heat for two minutes on heel rest up
position before ironing.
4. The pilot light indicator will light when the iron is up
switched ON; the pilot light will turn OFF once the
temperature required is reached. The pilot light will remain
OFF as long as the iron keeps the selected temperature,
as the temperature decreases, the thermostat will start
working; the pilot light will turn ON again.
5. First, iron synthetic fabric at low temperature, and then as
the temperature rises, iron wool, cotton, and linen
accordingly. The iron heats more quickly than it cool.
6. Allow time for the iron to heat when changing from a low
temperature to high.
7. Turn OFF and unplug the unit after use.
Produkspesifikasjoner
| Merke: | Imarflex |
| Kategori: | Stryke |
| Modell: | IR-30N |
Trenger du hjelp?
Hvis du trenger hjelp med Imarflex IR-30N still et spørsmål nedenfor, og andre brukere vil svare deg
Stryke Imarflex Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Stryke Manualer
- Stryke Philips
- Stryke Sencor
- Stryke Hyundai
- Stryke Rowenta
- Stryke Eldom
- Stryke Brentwood
- Stryke Di4
- Stryke Mellerware
- Stryke Polti
- Stryke Camry
- Stryke Yamazen
- Stryke Qilive
Nyeste Stryke Manualer
28 Oktober 2024
23 Oktober 2024
20 Oktober 2024
20 Oktober 2024
20 Oktober 2024
20 Oktober 2024
20 Oktober 2024
17 Oktober 2024
16 Oktober 2024
16 Oktober 2024