JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 Bruksanvisning

JL Audio Ikke kategorisert Stealthbox SBX-T-TCMAX3G/12TW3

Les nedenfor 📖 manual på norsk for JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
I N S T A L L A T I O N G U I D E
for the
SBX-T-TCMAX3G/12TW3
SKU# 94749
2022-Up Toyota Tundra CrewMax
Installation requires appropriate tools and safety equipment.
Professional installation is recommended.
If you prefer to perform your own installation, please read this
installation guide completely before beginning.
Before cutting or drilling, check for potential obstacles behind
mounting surfaces.
Mount this product securely to prevent damage or injury in
severe conditions.
INSTALLATION
DIFFICULTY:
ESTIMATED TIME:
1 HOUR
Enclosure Type: Sealed
Driver Type: 12TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
Continued on Next Page
25
OUT
OF
SBX-T-TCMAX3G/12TW3 INSTR_SKU# 011613
IN CL U DE D HAR DW A R E
Continued on Next Page
Page 2 • JL Audio, Inc., 2024
BOM ID DescriptionQty SKU
1 2 155111 M10 Serrated Flange Locknut
2 1 155073 Front Bracket
3 2 155108 M10 x 20mm Flanged Hex Head Screw
4 3 155107 M6 x 16mm Flanged Hex Head Screw
5 1 155074 Side Bracket
6 1 155109 M6 x 25mm Flanged Hex Head Screw
7 1 155110 M6 Flanged Serrated Locknut
- 1 194157 Vibra-Tite 132 (not shown)
- 2 150249 Foam Tape (not shown)
SBX-T-TCMAX3G/12TW3 INSTR_SKU# 011613
Page 3 • JL Audio, Inc., 2024 Continued on Next Page
S T E P 8
Remove the Side Bracket from the seat frame.
Using a 1/8” drill bit, carefully drill through the
center mark on the storage pocket. Using a 1”
drill bit, carefully enlarge the hole.
Repeat the process for the Front Bracket.
S T E P 7
Align the Front Bracket to the seat frame, as
shown. Temporarily secure the Front Bracket
with an M10 x 20mm Flanged Hex Head Screw
on the outside of the frame and an M6 Flanged
Serrated Locknut on the inside of the frame.
Mark the center location of the two slots in the
Front Bracket onto the storage pocket.
S T E P 6
Align the Side Bracket to the seat frame, as
shown. Temporarily secure the Side Bracket
with an M6 x 25mm Flanged Hex Head Screw
on the outside of the frame and an M6 Flanged
Serrated Locknut on the inside of the frame.
Mark the center location of the slot in the Side
Bracket onto the storage pocket.
S T E P 5
Remove the outer storage pocket trim panel.
S T E P 4
Carefully remove the retaining clips around the
upper perimeter of the storage pocket.
S T E P 3
Carefully unclip and remove the rear door sill
panel on the driver’s side.
S T E P 2
Lift the rear seat bottom and empty the
storage pocket.
S T E P 1
Empty the rear seat area.
SBX-T-TCMAX3G/12TW3 INSTR_SKU# 011613

Produkspesifikasjoner

Merke: JL Audio
Kategori: Ikke kategorisert
Modell: Stealthbox SBX-T-TCMAX3G/12TW3

Trenger du hjelp?

Hvis du trenger hjelp med JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert JL Audio Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer