Lincoln Electric VIKING 2450D Bruksanvisning

Les nedenfor 📖 manual på norsk for Lincoln Electric VIKING 2450D (14 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/14
GRAPHICS MAY VARY
Operator’s Manual
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10285 | Issue D ate 07/15
© Lincoln Global, Inc. All Rights Reserved.
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
VIKING TM 2450D Series
Auto-Darkening Helmets
with 4C Technology
TABLE OF CONTENTS Page
SAFETY WARNINGS – READ BEFORE USING 1
HELMET INFORMATION 2
SPECIFICATIONS 3
OPERATING INSTRUCTIONS 4
CARTRIDGE OPERATIONS/FEATURES 5 thru 7
HELMET CARE AND MAINTENANCE 8
SHADE GUIDE SETTINGS 8
CARTRIDGE AND LENS REPLACEMENT 9
TROUBLESHOOTING 10
WARRANTY INFORMATION 11
REPLACEMENT PARTS 11
SAFETY WARNINGS – READ BEFORE USING
ARC Rays can injure eyes and burn skin
• Before welding, always inspect helmet and filter lens to be sure they are fitted
properly, in good condition and not damaged.
• Check to see that the clear lens is clean and securely attached to the helmet.
• Always wear safety glasses or goggles under the welding helmet and protective
clothing to protect your skin from radiation, burns and spatter.
• Ensure that optical radiation from other welder’s arcs in the immediate area
does not enter in from behind the helmet and auto-darkening filter.
Note: Auto-darkening filters in Lincoln helmets are designed to protect the user against harmful
ultra-violet and infrared rays both in the dark and light states. No matter what shade the filter is
set to, the UV/IR protection is always present.
FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases
from your breathing zone and general area.
• When welding with electrodes which require special ventilation such as
stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which pro-
duce highly toxic fumes, keep exposure as low as possible and within
applicable OSHA PEL and ACGIH TLV limits using local exhaust or
mechanical ventilation. In confined spaces or in some circumstances,
outdoors, a respirator may be required. Additional precautions are also
required when welding on galvanized steel.
1
WARNING
Refer to http://www.lincolnelectric.com/safety
for additional safety information.

Produkspesifikasjoner

Merke: Lincoln Electric
Kategori: Ikke kategorisert
Modell: VIKING 2450D

Trenger du hjelp?

Hvis du trenger hjelp med Lincoln Electric VIKING 2450D still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Lincoln Electric Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer