Lumens OIP-AC01 Bruksanvisning

Les nedenfor 📖 manual på norsk for Lumens OIP-AC01 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
www.MyLumens.com
Copyright © 2021 Lumens Digital Optics Inc. All rights reserved.
5100462- SEP. 2021 50
OIP-AC01 Quick Installation Guide
1. PACKAGE CONTENTS
6U Rack Chassis
Installation Guide
Power Adapter
Power Connector
M5 Screw p1-x8
Cable Clip p1-x5
(Appearance may vary
depending on country/region
2. Power & System Requirements
Power Requirement: DC 12V, 3A power supply for the cooling fan system.
System Requirement:
The 6U rack chassis requires a minimum of 266.7mm (10.5in) contiguous
free space in the rack for mounting.
With the Cooling Fan System installed, an additional 1U space above the
chassis should be left empty to provide space for air to ow freely.
3. Installation Instructions
STEP 1
Install the OIP-AC01 to the rack with M5 Screws*8pcs.
STEP 2
Unscrew the 3 thumbscrews holding the top locking panel in place, and remove
the panel from the front of the chassis. Unscrew the 3 thumbscrews holding the
bottom locking panel in place, and remove the panel from the front of the
chassis.
Note: The thumbscrews are connected to the locking panels with a retention mechanism
and will not come completely free when they have been unscrewed from the chassis.
www.MyLumens.com
Copyright © 2021 Lumens Digital Optics Inc. All rights reserved.
STEP 3
Align and then carefully slide a full or half-length compatible audio/video unit into
the top/bottom grooves of a free slot. Half-length units are designed with a notch
to prevent them from sliding all the way to the back of the rack chassis. Repeat
this step until all units have been installed.
Note: If fewer than 15 units are being mounted it is strongly suggested to leave empty
space between units that get particularly warm to improve airow dissipation.and heat
STEP 4
Reattach the top and bottom locking panels by screwing in the 3 thumbscrews on each
until they are tight and . secure
Note: Be careful to not overtighten the thumbscrews as this could damage the screw
threads.
STEP 5
Connect DC 12V, 3A supply to the cooling fan system power

Produkspesifikasjoner

Merke: Lumens
Kategori: Ikke kategorisert
Modell: OIP-AC01

Trenger du hjelp?

Hvis du trenger hjelp med Lumens OIP-AC01 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Lumens Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer