Luxul AGS-1008M Bruksanvisning
Les nedenfor 📖 manual på norsk for Luxul AGS-1008M (8 sider) i kategorien Bryter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/8
READ ME FIRST
QUICK INSTALL GUIDE
8-Port Gigabit Switch
AGS-1008M
Includes:
AGS-1008M 8-Port Gigabit Switch
Magnet Mount Kit
Rubber Feet
Power Cord
SETUP AND CONFIGURATION
1
Physical Installation
The AGS-1008M can be magnet-mounted or used as a desktop switch. Install
the AGS-1008M in a stable/safe place to avoid any possible damage. Avoid
placement in direct sunlight. Do not place heavy articles on the AGS-1008M
and verify the ground connection of the outlet is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the AGS-1008M, then place the switch horizontally
on a solid, level platform.
Magnet Installation
Locate the small, circular magnets included in the AGS-1008M box. Place the
magnets in the circular indentions located on the bottom of the AGS-1008M,
lining up the screw-holes. Use the screws included in the AGS-1008M box to
fasten the magnets to the device. Take care to not tighten the magnets too
much as they may snap under excessive pressure.
Attach Feet for Desktop Installation Installation of Magnetic Feet
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the AGS-1008M to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The AGS-1008M supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode.
The AGS-1008M may be powered by either the included AC adapter, or
via PoE. To power the switch to line power, use only the included power
adapter to connect the AGS-1008M to a surge protected outlet.
cCAUTION: Use only the included power supply. A dierent power
supply could damage the AGS-1008M.
To power the switch via PoE, connect the AGS-1008M to another switch via
the PoE In port.
PoE Powered
AC Powered
Luxul Switch
Powering the AGS-1008M by AC or PoE
Produkspesifikasjoner
| Merke: | Luxul |
| Kategori: | Bryter |
| Modell: | AGS-1008M |
Trenger du hjelp?
Hvis du trenger hjelp med Luxul AGS-1008M still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter Luxul Manualer
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
Bryter Manualer
- Bryter D-Link
- Bryter Lancom
- Bryter IFM
- Bryter TP Link
- Bryter Totolink
- Bryter StarTech.com
- Bryter Yamaha
- Bryter Extron
- Bryter Lindy
- Bryter Netgear
- Bryter Digitus
- Bryter Panasonic
- Bryter LevelOne
- Bryter Schneider
- Bryter EMOS
- Bryter CSL
- Bryter Smart-AVI
- Bryter Generac
- Bryter Dahua Technology
- Bryter Sonance
- Bryter Planet
- Bryter PCE
- Bryter Equip
- Bryter Speaka
- Bryter Nedis
- Bryter Alcatel
- Bryter Advantech
- Bryter Atlona
- Bryter Crestron
- Bryter INOGENI
- Bryter PureLink
- Bryter Kramer
- Bryter ATen
- Bryter Blustream
- Bryter WHALE
- Bryter Tenda
- Bryter Suevia
- Bryter ZyXEL
- Bryter Homematic IP
- Bryter Vimar
- Bryter Setti+
- Bryter Trendnet
- Bryter Intellinet
- Bryter IOGEAR
- Bryter Kaiser
- Bryter Finder
- Bryter Hager
- Bryter DEHN
- Bryter Berker
- Bryter Adder
- Bryter Brilliant
- Bryter Roline
- Bryter QNAP
- Bryter Ebara
- Bryter Rex
Nyeste Bryter Manualer
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
15 Januar 2025