Luxul AMS-1816P Bruksanvisning
Les nedenfor 📖 manual på norsk for Luxul AMS-1816P (8 sider) i kategorien Bryter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/8
READ ME FIRST
QUICK INSTALL GUIDE
18-Port Gigabit PoE+ L2 Managed
Switch
AMS-1816P
Includes:
AMS-1816P 18-port/16-port PoE+ switch
Rack mount kit
Rubber feet
Power cord
INSTALLATION AND SETUP
1
Physical Installation
The AMS-1816P can easily be installed in a standard 19” rack. Two mounting ears
are included for installing and stabilizing the switch. When attaching the mounting
ears and installing the switch in a rack, please refer to the following illustration:
Rack-Mounting the AMS-1816P
Use the included screws to attach the mounting ears to each side
of the switch.
Mount the switch in the rack with the LEDs facing outwards. Be sure the
switch is level and properly secured in the rack.
Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the AMS-1816P.
2Connecting Ethernet and Power
Ethernet and Power Connections
Use one of the 18 Ethernet ports to connect the AMS-1816P to any Ethernet
enabled device, including control systems, routers, or other switches.
No crossover cable is necessary.
The AMS-1816P supports 10/100/1000 Mbps Ethernet, 10/100 Mbps half/
full-duplex mode, and 1000 Mbps full-duplex mode. Ports 17 and 18 consist
of two Gigabit RJ-45 uplink ports and 2 shared SFP combo ports; use only
one of the Ethernet port or fiber port with the same-numbered ports at
a time.
Use the included power cable to connect the AMS-1816P to a surge-
protected outlet. The AC input socket is on the rear panel. The built-in
power supply supports 100~240VAC at 50/60Hz.
Network Cabling
Luxul recommends at least Cat-5e unshielded twisted pair (CAT5e UTP)
cabling. To ensure best performance and stable data transmission at 1000
Mbps, use Category-6 unshielded twisted pair (CAT6 UTP).
cCAUTION: Multiple Uplink channels can create loops, resulting in
network failure. Ensure only one Uplink channel exists
between switches or between the AMS-1816P and a router.
nNOTE: When powering up, the port LEDs may take a moment to
initialize. This is normal as the AMS-1816P initialization and
startup sequence completes.
nNOTE: The AMS-1816P has an internal 185W power supply. Do not
exceed 185W combined consumption of all PoE devices.
Produkspesifikasjoner
| Merke: | Luxul |
| Kategori: | Bryter |
| Modell: | AMS-1816P |
Trenger du hjelp?
Hvis du trenger hjelp med Luxul AMS-1816P still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter Luxul Manualer
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
Bryter Manualer
- Bryter D-Link
- Bryter Lancom
- Bryter IFM
- Bryter TP Link
- Bryter Totolink
- Bryter StarTech.com
- Bryter Yamaha
- Bryter Extron
- Bryter Lindy
- Bryter Netgear
- Bryter Digitus
- Bryter Panasonic
- Bryter LevelOne
- Bryter Schneider
- Bryter EMOS
- Bryter CSL
- Bryter Smart-AVI
- Bryter Generac
- Bryter Dahua Technology
- Bryter Sonance
- Bryter Planet
- Bryter PCE
- Bryter Equip
- Bryter Speaka
- Bryter Nedis
- Bryter Alcatel
- Bryter Advantech
- Bryter Atlona
- Bryter Crestron
- Bryter INOGENI
- Bryter PureLink
- Bryter Kramer
- Bryter ATen
- Bryter Blustream
- Bryter WHALE
- Bryter Tenda
- Bryter Suevia
- Bryter ZyXEL
- Bryter Homematic IP
- Bryter Vimar
- Bryter Setti+
- Bryter Trendnet
- Bryter Intellinet
- Bryter IOGEAR
- Bryter Kaiser
- Bryter Finder
- Bryter Hager
- Bryter DEHN
- Bryter Berker
- Bryter Adder
- Bryter Brilliant
- Bryter Roline
- Bryter QNAP
- Bryter Ebara
- Bryter Rex
Nyeste Bryter Manualer
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
15 Januar 2025