Metra 99-7875 Bruksanvisning
Les nedenfor 📖 manual på norsk for Metra 99-7875 (12 sider) i kategorien Bilsett. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/12
INSTALLATION INSTRUCTIONS FOR PART 99-7875/99-7875T
99-7875/99-7875T
APPLICATIONS
Honda Accord 2008-up
(For Non-Navigation models with Dual Zone Climate controls)
Honda Accord Crosstour 2010-up
KIT FEATURES
• Painted To Match Factory Dash
99-7875=Charcoal, 99-7875T=Taupe
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
1-800-221-0932
© COPYRIGHT 2008-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
Small Flat Blade Screwdriver • Panel Removal Tool
Phillips Screwdriver • Cutting Tool
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1729 - Honda harness 2008-up
• 70-1730 - Honda amp interface harness 2008-up
Antenna Adapter:
• 40-HD10 - Honda antenna adapter 2005-up
TOOLS REQUIRED:
D E
F
CBA
Dash Disassembly
Honda Accord 2008-up / Crosstour 2010-up
(With dual zone automatic climate controls)
. . . . . . . . . . . . . . . . . . . . .1,2
Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Kit Assembly
- DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 4
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 5
- Double DIN /Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . 6
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TABLE OF CONTENTS
99-7875/99-7875T
*Note:
Refer also to the instructions included with the aftermarket radio.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
towa a better tomorrord w.
Metra recommends MECP
certified technicians
99-7875/99-7875T DASH DISASSEMBLY
HONDA ACCORD 2008-UP/CROSSTOUR 2010-UP
1
1
Unclip and remove the trim panel at
the left side of the factory radio.
(
Figure B)
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
3
Unclip and remove the trim panel
from above the glove box at the right
side of the factory radio. (
Figure A)
2
Unclip and remove the top of the cen-
ter console including the cup holders.
(
Figure D)
5
Remove (2) Phillips screws at the
bottom edge of the pocket assembly.
(
Figure E)
6
Remove the (2) Phillips screws from
the left and right side of the of the
factory radio. (
Figure C)
4
Continue on page 2.
D
B
C
A
E
7
Remove (2) Phillips screws facing up
inside of the pocket below the factory
radio. (
Figure F)
Unclip and remove the pocket assem-
bly. (
Figure G)
8
Produkspesifikasjoner
| Merke: | Metra |
| Kategori: | Bilsett |
| Modell: | 99-7875 |
Trenger du hjelp?
Hvis du trenger hjelp med Metra 99-7875 still et spørsmål nedenfor, og andre brukere vil svare deg
Bilsett Metra Manualer
29 Desember 2024
29 Desember 2024
29 Desember 2024
29 Desember 2024
29 Desember 2024
29 Desember 2024
22 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Bilsett Manualer
Nyeste Bilsett Manualer
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025