Midland MXTA48 Bruksanvisning

Les nedenfor 📖 manual på norsk for Midland MXTA48 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
5900 Parretta Drive KANSAS CITY, MO 64120 ● ●
PHONE: (816) 241-8500 FAX: (816) 241-5713
EMAIL: mail@midlandusa.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
4/8/2024
MXAT04 and MXAT05 Assembly Diagram
1. The MXAT04 and MXAT05 are designed for mounting brackets or surfaces up to 3/4" thick. substantial
2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.
3. Part B, 3/8” spacer, is optional for mounting brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,
should be removed for brackets or surfaces more than 3/8” thick.
4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid
off the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.
5. Route the coaxial cable from the topside through the mounting hole in the bracket or surface, Part C .
6. he Slide t at washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order
shown.
7. Hold the antenna assembly in position while tightening the hex nut, Part F. Maximum torque 35 - . lb ft
8. Finish routing the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259
adapter.

Produkspesifikasjoner

Merke: Midland
Kategori: Ikke kategorisert
Modell: MXTA48

Trenger du hjelp?

Hvis du trenger hjelp med Midland MXTA48 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Midland Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer