Milwaukee M18 Fuel Angler 2873B-22 Bruksanvisning

Milwaukee Ikke kategorisert M18 Fuel Angler 2873B-22

Les nedenfor 📖 manual på norsk for Milwaukee M18 Fuel Angler 2873B-22 (16 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/16
Cat. No. / No de cat.
2873-20
M18 FUEL™ ANGLER™ PULLING FISH TAPE
RUBAN À FILS DE TIRAGE ANGLER™ M18 FUEL™
CINTA PASADORA PARA JALAR M18 FUEL™ ANGLER™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and o󰀨. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may a󰀨ect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations di󰀨erent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
3
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
PULLING FISH TAPE
• Do not use on or near live circuits. When working
near electrical equipment, use extreme caution.
When pulling through conduit which contains any
other wires, be certain that power to those wires
has been turned o󰀨 or disconnected.
• Maintain proper footing and balance when
performing pulling operations. Do not pull from
a ladder. If a snag or resistance is encountered, a
ladder could become unstable which may result in
a loss of balance or control.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
Revolutions per Minute (RPM)
Read operator's manual
Wear eye protection
Do not use on or near live circuits
C US
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. 2873-20 .....................................................
Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
RPM .....................................................................37
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Compatible Replacement Cartridges
120' x 1/8" Steel Pulling Fish Tape
Replacement Cartridge 48-44-5176.....................
240' x 1/8" Steel Pulling Fish Tape
Replacement Cartridge 48-44-5178......................
100' Non-Conductive Polyester Pulling Fish Tape
Replacement Cartridge 48-44-5195......................

Produkspesifikasjoner

Merke: Milwaukee
Kategori: Ikke kategorisert
Modell: M18 Fuel Angler 2873B-22

Trenger du hjelp?

Hvis du trenger hjelp med Milwaukee M18 Fuel Angler 2873B-22 still et spørsmål nedenfor, og andre brukere vil svare deg


Ikke kategorisert Milwaukee Manualer

Milwaukee

Milwaukee M18 Fuel Angler 2873B-22 Bruksanvisning

30 Desember 2025
Milwaukee

Milwaukee M12 FUEL 2559-21 Bruksanvisning

15 Desember 2024
Milwaukee

Milwaukee L4 PPS Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee M12 IR-201B Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee TRB 1 Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee MXF NRG Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee ROLL-ON 3300R Bruksanvisning

17 Oktober 2024
Milwaukee

Milwaukee MXF041 Bruksanvisning

16 Oktober 2024
Milwaukee

Milwaukee M18 Radius ONE-KEY 2150-20 Bruksanvisning

16 Oktober 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Artsound

Artsound SMART IN Bruksanvisning

2 Januar 2025
Thermaltake

Thermaltake Dr. Power III Bruksanvisning

2 Januar 2025
Bazooka

Bazooka BPB-KP7W-G3 Bruksanvisning

2 Januar 2025
ORNO

ORNO OR-ZL-1602 Bruksanvisning

2 Januar 2025
Boss

Boss Distortion DS-1X Bruksanvisning

2 Januar 2025
AEA

AEA TRP3 Bruksanvisning

2 Januar 2025
AMX

AMX HPX-900-NA Bruksanvisning

2 Januar 2025
AMX

AMX HPG-10 Bruksanvisning

2 Januar 2025
AMX

AMX HPX-600-NA Bruksanvisning

2 Januar 2025
AMX

AMX HPX-1200-NA Bruksanvisning

2 Januar 2025