Milwaukee ROLL-ON 3300R Bruksanvisning

Milwaukee Ikke kategorisert ROLL-ON 3300R

Les nedenfor 📖 manual på norsk for Milwaukee ROLL-ON 3300R (32 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/32
Cat. No. / No de Cat.
3300R
ROLL-ON™ 7200W/3600W 2.5kWh POWER SUPPLY
SOURCE D'ALIMENTATION DE 7 200W / 3 600W 2,5kWh
ROLL-ON™
FUENTE DE PODER DE 7 200W/3 600W 2,5kWh ROLL-ON™
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
The power supply must be
charged before rst use.
I l f a u t a v o i r l a s o u r c e
d’alimentation chargée avant de
l’utiliser pour la première fois.
La fuente de poder debe estar
cargada antes de usarla por
primera vez.
2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
READ ALL SAFETY WARNINGS,
I N ST R U CT I O NS , IL L U S T R A-
TIONS AND SPECIFICATIONS PROVIDED
WITH THIS POWER SUPPLY. FAILURE TO FOL-
LOW ALL INSTRUCTIONS LISTED BELOW MAY
RESULT IN ELECTRIC SHOCK, FIRE AND/OR
SERIOUS INJURY. SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE REFERENCE.
WORK AREA SAFETY
• This power supply contains energy higher than
1 kWh. Do not use in a sleeping room or any
habitable space of a dwelling unit.
• Rainproof. For indoor use or temporary outdoor
use. Exercise reasonable care when using in
wet conditions. Do not charge outdoors. Keep
storage door closed.
• Avoid dangerous environments. Do not charge
power supply in rain, snow, damp or wet locations.
Do not use or charge power supply in the presence
of explosive atmospheres (gaseous fumes, dust
or ammable materials) because sparks may be
generated when plugging in the power supply,
possibly causing re.
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Close supervision is necessary when a power
supply is used near children.
• Never leave the power supply unattended while
in use.
• Do not stack power supplies.
• Arrange power cords carefully to avoid hazard-
ous environments. Tripping or snagging on power
cords can cause injury and power supply damage.
Keep power cords dry and o󰀨 the ground. Do not
allow power cords to run through puddles or across
wet ground.
ELECTRICAL SAFETY
• Charge power supply only with the provided
power cord. Do not use if the power cord is dam-
aged in any way. If damaged or missing, replace
with identical replacement parts.
• Power cord plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) equipment.
• Do not abuse the power cord. Never use the
power cord for carrying, pulling or unplugging
the power supply. Keep power cord away from heat,
oil, sharp edges or moving parts. Do not unplug by
pulling on the power cord. To unplug, grasp the plug,
not the power cord.
• Unplug the power cord from outlet when not in
use and before servicing or cleaning.
• Avoid using an extension cord for AC input. When
unavoidable, use a properly wired 14 gauge or
larger extension cord with pins that are the same
number, size and shape as the pins on the AC
input. Make sure that the extension cord is in good
electrical condition.
• Do not exceed the load rating of the extension
cord. Exceeding the load capacity of the extension
cord could result in overheating, fire, electrical
shock, or injury.
• The power supply output is disconnected
(isolated) from the AC receptacle ground pin
and frame; electrical equipment that requires
this connection may not operate unless properly
connected to the ground pin.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Connect only to a properly grounded outlet.
Ground to local codes.
• Connect to a GFCI protected circuit when
charging.
• Test GFCI monthly.
• Do not connect the power supply output to a
building’s electrical system.
• Do not permanently install in a vehicle.
• Do not overload the power supply’s capacity.
Exceeding the power supply's wattage/amperage
capacity may damage the power supply and/or
electrical devices connected to it.
• Corded equipment may require more power
consumption than this power supply is capable of
providing. Check the equipment's manual to avoid
damage to the power supply or risk of personal injury.
• Do not short circuit AC outputs. A short-circuited
power supply may cause re, personal injury, and
power supply damage. A power supply will short
circuit if a metal object makes a connection between
the line and neutral terminals of the AC outputs. Do
not place a power supply near anything that may
cause a short circuit.
• Do not allow uids to ow into power supply.
Corrosive or conductive uids, such as seawater,
certain industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
• Do not use if power supply has been immersed in
a ooded area. Do not place or store power supply
where it can fall or be pulled into water or liquid.
• Do not use a power supply or corded equipment
that has been damaged or modied. Damaged or
modied products may exhibit unpredictable behavior
resulting in re, explosion or risk of injury.
• Do not expose a power supply or corded equip-
ment to re or excessive temperature. Do not use
an external device to heat the power supply. Do
not burn or incinerate the power supply even if it is
damaged, dead or completely discharged. Exposure
to re or temperature above 265°F (130°C) may
cause explosion. Toxic fumes and materials are
created when burned.
• Do not use a power supply that is smoking/
showing signs of melting/making unusual
noises/heating up. Move power supply away
from structures or combustible materials. If a
re starts, call re department.
PERSONAL SAFETY
• Always use common sense and be cautious
when using this power supply. It is not possible
to anticipate every situation that could result in a
dangerous outcome. Do not use this power supply
if you do not understand these operating instruc-
tions or you feel the work is beyond your capability;
contact Milwaukee Tool or a trained professional for
additional information or training.
• Do not sit or step on the power supply.
• Only charge in a well ventilated area. Do not block
vents; keep free of dust, lint, hair, and anything else
that may reduce air ow. Only use power supply in
3
an upright position. Do not put ngers, hands, or
other objects into openings.
• Do not smoke, strike a match, or cause a spark
in the vicinity of a charging power supply. Vented
gases may explode.
USE AND CARE
• Know your power supply. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specic potential hazards related to
this power supply. Do not alter or modify the power
supply from the original design or function. Misuse
and improper handling can cause injury.
• Use corded equipment according to the equipment
manufacturer's instructions and in locations
specied by the manufacturer. Equipment may
not be suitable for outdoor/rain use.
• Do not plug corded equipment into the power
supply when the accessory cover is installed.
• Suitable for use in a repair facility. This equipment
has arcing or sparking parts which should not be
exposed to ammable vapors; locate equipment
at least 18" (457 mm) above the oor when used
in a repair facility.
• Operating this power supply less than 3' (1 m)
from building or other obstruction can cause
overheating and damage to the power supply. For
proper cooling, allow at least 3' (1 m) of empty
space around the power supply.
• Always assume the AC outlets are live. The auto
start ONE-KEY™ feature can result in unexpected
starting of corded equipment.
• This power supply is not intended for use with
emergency medical equipment or life support
devices.
• Do not use the power supply as a workbench
where cutting, drilling, or other activities could
cause damage to the power supply.
• Do not place more than 150 lbs on power supply
when stationary. Do not load higher than the
extended handle position.
• Follow all charging instructions and do not charge
a power supply outside the temperature range
specied in the instructions. Charging improperly
or at temperatures outside the specied range may
damage the integrated battery and increase the
risk of re.
• Do not crush, drop, damage or disassemble
power supply. Do not use a power supply that has
received a sharp blow, been dropped, run over, or
damaged in any way (e.g., pierced with a nail, hit
with a hammer, stepped on, in a vehicle accident).
If it is damaged, contact an authorized MILWAUKEE
service facility.
• Under abusive conditions, liquid may be ejected
from the integrated battery; avoid contact. If
contact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the integrated battery may
cause irritation or burns.
SERVICE
• Inspect power supply and power cord regularly.
Have the power supply serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
supply is maintained. Do not disassemble power
supply. Contact a MILWAUKEE service facility for
ALL repairs.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
ACCESSORIES
• Use only recommended attachments. Use of an
attachment not recommended or sold by the power
supply manufacturer may result in a risk of re,
electric shock or personal injury.
• Always follow all manufacturer's safety rules of
the attachments.
TRANSPORTING
• Do not place more than 60 lbs on power supply
when transporting. Do not load higher than 11".
• To reduce the risk of injury, re, or explosion due
to damaged battery packs, remove side mounted
chargers before transporting.
• Secure the power supply before transporting
to prevent tipping, rolling, slipping, and falling.
• When moving power supply, do not overreach.
Keep proper footing and balance at all times.
Clear the area of obstructions. This enables better
control in unexpected situations.
• Use multiple people whenever it is necessary to
lift or carry the power supply. The power supply
is heavy. Lift with legs, not back.
• Only lift the power supply by the roll cage, do
not lift by the handle.
• Do not transport power supply with corded
equipment plugged into the outlets.
STORAGE
• To prevent the risk of re or shock; store your
power supply upright in a cool, dry place. Do
not store where temperatures may exceed 122°F
(50°C) such as in direct sunlight, a vehicle, or metal
building during the summer. Do not store outside.
• Do not hang/hoist the power supply for storage
(eg., from a crane hook).
SPECIFICATIONS
Cat. No. 3300R ........................................................
Charger Rating* .......................................... 1000 W
Rated Input Voltage .................. Universal 120 VAC
Rated Input Amps ........................................... 9.3 A
Total Rated Output (Both Receptacles)
Peak Watts 7200 W for 5s .....................................
Rated Watts ................ 3600 W@ 65% Duty Cycle
Voltage.................................................... 120 VAC
Rated Frequency 60 Hz ...........................................
Rated Output Voltage
(USB-A) 5 VDC @ 2.4 A (12 W) ............................
Rated Output Voltage
(USB-C) 20 VDC @ 3 A (Up to 60 W) ....................
Cord Cat. No..........................................22-64-0026
UL Listed, Type SJOW, 3-conductor,
No. 14 AWG min, rated 105°C min,
300 V/15 A min, 6 ft (1.8 m) min length
Bonding Terminal Stud .......................M4 x 0.7 ISO
Weight** (Tool Only) 104 lb (47.2 kg) .......................
Recommended Ambient
Operating Temperature ................... -4°F to 104°F
(-20°C to 40°C)
Recommended Ambient
Charging Temperature.................... 41°F to 104°F
(5°C to 40°C)
* The charger power can be adjusted using the ONE-KEY™ app.
** Add additional PACKOUT™ weight and contents attached
to power supply.

Produkspesifikasjoner

Merke: Milwaukee
Kategori: Ikke kategorisert
Modell: ROLL-ON 3300R

Trenger du hjelp?

Hvis du trenger hjelp med Milwaukee ROLL-ON 3300R still et spørsmål nedenfor, og andre brukere vil svare deg


Ikke kategorisert Milwaukee Manualer

Milwaukee

Milwaukee M18 Fuel Angler 2873B-22 Bruksanvisning

30 Desember 2025
Milwaukee

Milwaukee M12 FUEL 2559-21 Bruksanvisning

15 Desember 2024
Milwaukee

Milwaukee L4 PPS Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee M12 IR-201B Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee TRB 1 Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee MXF NRG Bruksanvisning

22 Oktober 2024
Milwaukee

Milwaukee ROLL-ON 3300R Bruksanvisning

17 Oktober 2024
Milwaukee

Milwaukee MXF041 Bruksanvisning

16 Oktober 2024
Milwaukee

Milwaukee M18 Radius ONE-KEY 2150-20 Bruksanvisning

16 Oktober 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Amazfit

Amazfit Bip 5 Unity Bruksanvisning

16 Januar 2025
Lowepro

Lowepro Flipside Trek BP 350 AW II Bruksanvisning

16 Januar 2025
Audison

Audison Prima APS 8 D Bruksanvisning

16 Januar 2025
Black Line

Black Line BLMH 36 Bruksanvisning

16 Januar 2025
Absco

Absco M 151151 Bruksanvisning

16 Januar 2025
ADDAC System

ADDAC System ADDAC200CT Bruksanvisning

16 Januar 2025
Emerio

Emerio LR-131325.1 Bruksanvisning

16 Januar 2025
Sony

Sony WRT-822B Bruksanvisning

16 Januar 2025
IKEA

IKEA SMÅSPORRE 204.570.22 Bruksanvisning

16 Januar 2025
IKEA

IKEA SÄFFEROT 904.570.71 Bruksanvisning

16 Januar 2025