Phoenix Gold ZDT-FCA2 Bruksanvisning

Les nedenfor 📖 manual på norsk for Phoenix Gold ZDT-FCA2 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
IMPORTANT: Technical knowledge is necessary for installation Please ensure that the
correct tools are using during the installation to avoid damage to the vehicle or product.
Phoenix Gold can not be held responsible for the installation of this product.
PLUG & PLAY DSP AMPLIFER
INSTRUCTION MANUAL
PHOENIXGOLD.COM
V.1.1
Remove the OEM Head Unit
OEM Head Unit
Remove the OEM Connector from the
Head Unit
STEP 1 STEP 2
OEM Head Unit
OEM
Head Unit
OEM
Head Unit
ZDT Harness
ZDC Harness
1. Connect the ZDT harness to the rear of the OEM head unit.
2. Connect the ZDT harness to the ZDC harness as shown in the above diagram.
3. Run the ZDC harness from behind the OEM head unit through the back of the dashboard to the
location of where you will position your amp. We would advise installing the ZDA amp under the
seat or in the boot of the vehicle.
NOTE: The information show above is a guide ONLY to installing the ZDA Amp under the passenger seat. Please be
advised that we would also recommend a trained professional auto electrician carry out the install of any of our products.
STEP 3
ZDA Amplifier
OEM Harness
Shown in Fig. 2
INSTRUCTION MANUAL
Example: Install under front seat
PHOENIXGOLD.COM
OEM Harness
Prior to installation the vehicle battery should be disconnected so no power is running to
any of the electrics in the vehicle.

Produkspesifikasjoner

Merke: Phoenix Gold
Kategori: Ikke kategorisert
Modell: ZDT-FCA2

Trenger du hjelp?

Hvis du trenger hjelp med Phoenix Gold ZDT-FCA2 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Phoenix Gold Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer