Sencor SWS 4500 Bruksanvisning
Sencor
Værstasjon
SWS 4500
Les nedenfor 📖 manual på norsk for Sencor SWS 4500 (40 sider) i kategorien Værstasjon. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/40
SWS 4500
EN Weather Station with Wireless SensorUser Manual
CZ Uživatelská příručka Meteorologická stanice s bezdrátovým
snímačem
SK Používateľská príručka Meteorologická stanica sbezdrôtovým
snímačom
HU Felhasználói kézikönyv Meteorológiai állomás vezeték nélküli
érzékelővel
PL Podręcznik użytkownika Stacja pogodowa zczujnikiem
bezprzewodowym
EN – 2
We thank you for the purchase of our Color Display Weather Station. It has been designed and
constructed using innovative components and techniques to enable the perfect display by this device.
This unit is also equipped with an outdoor sensor.
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in test or images and any necessary changes made to technical data.
Things to consider:
1. Other wireless equipment using the same frequency band can reduce the transmission range.
2. The range of all wireless equipment depends on the type of obstacles located between the transmitter
and the receiver (e.g. a concrete wall will interfere with the signal much more than a plasterboard
wall).
If you experience problems, try the following:
1. Turn off any other existing wireless equipment to check whether this is the cause of the problem.
2. Move any other existing wireless equipment. Shorten the distance between the sending and receiving
devices and reduce the number of obstacles(walls, furniture,etc.) between them.
3. Try removing and reassembling batteries, if the batteries are old, try new ones.
SAFETY AND GUIDE
– Do not clean any part of the product with benzene, thinner or other solvent chemicals. If necessary,
clean it with a soft cloth.
– Do not dismantle or modify the product in any way.
– Never immerse the product in water, It will damage the product.
– Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
– Do not tamper with the internal components.
– Do not use used batteries .
– Do not use different types of batteries alkaline, standard or rechargeable batteries with this product.
– Remove the batteries if storing this product for a long period of time, otherwise the battery might
damage the product.
– Do not dispose of this product as unsorted municipal waste, it’s necessary to separately collect it for
special treatment.
– Do not place the main unit in rain or moisture.The transmit range depends on the type of obstacles
located between the transmitter and the receiver (e.g. a concrete wall will interfere with the signal
much more than a plasterboard wall).
– Be sure the sensor is mounted vertically, to allow moisture to drain out properly. Place out of direct
sunlight & ensure the sensor is well-ventilated.
– The distance between main unit and sensors should be at least 5~ 6.5 feet (1.5~2 meters) away from
any interfering sources such as computer monitors or TV sets.
– The main unit stay away from the metal window frames.
– Please do not use other electrical products such as headphones or microphone operating on the
same signal frequency. (433.92MHz), neighbors using electrical devices operating on the same signal
frequency can also cause interference.
– Place the main unit in a dry area, free of dirt and dust. To ensure accurate temperature measurement,
place out of direct sunlight and away from heat sources or vents.
EN – 3
PACKAGE CONTENTS
1× Digital Weather Station
1× Remote Sensor
1× User Manual
1× DC Adaptor (Batteries are not included)
1× Power Supply
MAIN UNIT INSTALLATION
– Remove the protective film that is applied to the LCD screen prior to using the product.
– Open the battery compartment cover, plugged in with power adapter and use, battery-power is
optional, since previous setting will be reset when plugged out, we recommend install the batteries for
the base station.
– Base station can stand upright on the table or mount on the wall.
SENSOR INSTALLATION
Base station supports up to 3 sensors connection, the sensor switch is located inside the battery
compartment, it can be switched 1,2,3,
matching the info of Channel 1, Channel 2, Channel 3 that synchronize on the OUTDOOR position.
1. Remove the battery compartment cover, chose the channel (1,2,3)by switching the channel shift.
2. Insert 2 x AA batteries matching the correct polarity (+ and -), the red led light will flash for once, then
assemble the battery compartment.
3. Put the sensor the position you desire.
Produkspesifikasjoner
| Merke: | Sencor |
| Kategori: | Værstasjon |
| Modell: | SWS 4500 |
Trenger du hjelp?
Hvis du trenger hjelp med Sencor SWS 4500 still et spørsmål nedenfor, og andre brukere vil svare deg
Værstasjon Sencor Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Værstasjon Manualer
- Værstasjon Fluke
- Værstasjon GoGEN
- Værstasjon Brandson
- Værstasjon Bearware
- Værstasjon Techno Line
- Værstasjon Davis
- Værstasjon Setti+
- Værstasjon GlobalTronics
Nyeste Værstasjon Manualer
27 Oktober 2024
24 Oktober 2024
23 Oktober 2024
22 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
19 Oktober 2024