Sonance Invisible Series IS10 Bruksanvisning

Sonance Høyttaler Invisible Series IS10

Les nedenfor 📖 manual på norsk for Sonance Invisible Series IS10 (20 sider) i kategorien Høyttaler. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/20
INVISIBLE SERIES SPEAKERS
INSTALLATION MANUAL
2
IMPORTANT SAFETY INSTRUCTIONS
This product is intended to be installed by professional
AV integrators and installers only. This product manual
is intended to serve as a general guideline for most
applications. It is the installer’s responsibility to ensure
this product is installed in accordance with local
building codes and regulations. Consult a local authority
for specific requirements, regulations, and building
codes of the jurisdiction in which this product is to be
installed.
READ THIS DOCUMENT IN ITS
ENTIRETY BEFORE ATTEMPTING USE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
7. Do not install near a heat source such as radiators,
heat registers, stoves, fireplaces, or other apparatus
(including amplifiers) that produce heat.
8. Only use attachments/accessories specified by
Sonance.
9. Refer all servicing to qualified service personnel.
BOX CONTENTS
IS6 IS8 IS10:| |
(2) Invisible Speakers with Cutout Templates
(4) Wire Nuts
(2) Stainless Steel Screw Sets
(8) 1/16” (1.6mm) Shims
(8) 1/8” (3.18mm) Shims
IS10W:
(1) Invisible Speaker with Cutout Template
(2) Wire Nuts
(1) Stainless Steel Screw Set
(4) 1/16” (1.6mm) Shims
(4) 1/8” (3.18mm) Shims
INVISIBLE SERIES SPEAKERS
IS6 | IS8 | IS10 | IS10W
TABLE OF CONTENTS
2 Important Safety Instructions & Box Contents
3 Product Description & Features
4 Product Preparation & Planning
5 Project Management
6 Invisible Speaker Installation Detail
8 Retrofit Installation
9 New Construction Installation
12 Finishing Instructions
16 Technical Specifications
17 FAQ
19 Technical Assistance & Service
20 Warranty
Scan QR code for additional information and resources.
For technical support call (949) 492-7777 or visit
www.sonance.com/in-wall-in-ceiling/invisible-series
3
PRODUCT DESCRIPTION
The Sonance Invisible Series speakers featuring Motion
Flex Technology oer a suite of advancements in
speaker engineering that delivers unparalleled acoustic
performance and installation enhancements that allow
a wider range of applications with more consistent
results. Together these performance and installation
improvements redefine what is possible from an
invisible speaker.
This line of full-range speakers and woofers incorporate
Wave Flex drive units, carbon fiber Air Flex woofers,
and acoustically-isolated baes, allowing for up to 180
degrees of smooth o-axis response.
The innovative Sonance DISC System enables non-
destructive measurement of the finish thickness for
consistent and repeatable installation results.
Sonance DSP amplifier presets should be used to
maximize the performance of any Invisible Series
system.
FEATURES
• In-wall or In-ceiling installation
• Compatible with 1/2” (12.5mm) & 5/8” (15mm)
drywall using included shims. Supply your own
shims for thicker substrates.
• Finish-up-to or finish-over with up to 1/8” (3mm)
flexible topping compound or finish material.
• 16” (406mm) and 12” (305mm) on-center
compatible.
• 170 degree hemispherical dispersion (IS6/IS8/IS10)
180 degree hemispherical dispersion (IS10W)
• Embedded depth discs allow the installer to verify
the finish material thickness with the optional DG-1
DISC System Depth Gauge (SKU 93491)
• Optional sound-isolating enclosure can be used
for up to 20dB reduction of sound transferred to
adjacent spaces.
• Per-transducer poly fuses integrated into every
speaker allow extra protection of each transducer
from over-current.
• 15 year limited warranty.
Mounting points for
attachment to framing.
FRONT
BACK
SIDE
Paper facing to ensure
finishes over the speaker and
surrounding drywall dry at the
same rate.
0.02” (0.5mm) beveled edge
allows for seamless joints.
Sonance DISC system. Four
steel discs embedded behind
the speaker diaphragm for
accurate finish thickness
measurement.
Mounting points for optional
sound-isolating enclosure.
12” (305mm) speaker lead.
9.49” (241mm) back width
allows for installation in 12”
(305mm) on-center stud and
joist spacing.

Produkspesifikasjoner

Merke: Sonance
Kategori: Høyttaler
Modell: Invisible Series IS10

Trenger du hjelp?

Hvis du trenger hjelp med Sonance Invisible Series IS10 still et spørsmål nedenfor, og andre brukere vil svare deg


Høyttaler Sonance Manualer

Sonance

Sonance Visual Experience VX86 Bruksanvisning

27 Februar 2025
Sonance

Sonance Invisible Series IS10 Bruksanvisning

27 Februar 2025
Sonance

Sonance Visual Experience VX86R SST Bruksanvisning

27 Februar 2025
Sonance

Sonance Visual Experience VX66R Bruksanvisning

27 Februar 2025
Sonance

Sonance Visual Performance Extreme VPXT8R Bruksanvisning

9 Januar 2025
Sonance

Sonance Visual Performance VP38R Bruksanvisning

9 Januar 2025
Sonance

Sonance MAG5.1R Bruksanvisning

9 Januar 2025
Sonance

Sonance MAG6R Bruksanvisning

9 Januar 2025
Sonance

Sonance Mariner MX52 Bruksanvisning

2 Januar 2025
Sonance

Sonance MAG06V3 Bruksanvisning

16 Oktober 2024

Høyttaler Manualer

Nyeste Høyttaler Manualer

Metronic

Metronic 477074 Bruksanvisning

27 Mars 2025
Induction Dynamics

Induction Dynamics C2 Bruksanvisning

25 Mars 2025
ETON

ETON HEX 165 Bruksanvisning

20 Mars 2025
ETON

ETON PRW 50 Bruksanvisning

20 Mars 2025
ETON

ETON PRA 80 Bruksanvisning

20 Mars 2025
ETON

ETON PFX 16 Bruksanvisning

20 Mars 2025
SOUNDBOKS

SOUNDBOKS The Charger Bruksanvisning

20 Mars 2025
Streetz

Streetz CM717 Bruksanvisning

20 Mars 2025
Streetz

Streetz CM715 Bruksanvisning

20 Mars 2025
Streetz

Streetz CM716 Bruksanvisning

20 Mars 2025