Sonance Visual Performance Extreme VPXT8R Bruksanvisning
Les nedenfor 📖 manual på norsk for Sonance Visual Performance Extreme VPXT8R (3 sider) i kategorien Høyttaler. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/3
Box Contents
VPXT6 or VPXT6R or VPXT8R
(1) Quickstart guide / cutout template
(2) Speakers
(2) Paintable grilles
Or
VPXT6R SST
(1) Quickstart guide / cutout template
(1) Speaker
(1) Paintable grille
EXTREME SPEAKERS INSTRUCTION MANUAL
VPXT6 | VPXT6R | VPXT6R SST | VPXT8R
SONANCE VISUAL PERFORMANCE SERIES
Introduction
Thank you for purchasing Sonance Visual Performance
Series Speakers. This guide covers the following speaker
models: VPXT6 (6” Rectangular), VPXT6R (6” Round),
VPXT6R SST (6” Round, Single-Stereo Technology®) and
VPXT8R (8” Round).
Before Installation: Retro-t
1. Determine the location for the speaker.
2. Perform an obstruction survey to be certain that there are
no studs, conduit, pipes, heating ducts, pocket doors
or air returns in the wall cavity that will interfere with
the speaker.
3. Position the included cutout template where the
speaker is to be located and pencil an outline on the
wall or ceiling.
• If you are unsure about obstructions, drill a small hole
in the center of the outline and insert a coat hanger wire
into the hole to feel-around for possible obstructions.
4. Cut the mounting hole using tools appropriate for the
construction, and run the speaker wires from the
mounting hole to the amplier location.
Installation
Sonance Visual Performance Series Extreme speakers
feature an exclusive integral RotoLock® mounting system for
quick mounting directly into existing walls and ceilings.
1. Strip 1/4” – 1/2” (6mm – 13mm) of insulation from each
speaker lead. Twist the strands or tin the exposed wire
with solder to ensure that there are no stray strands.
1
NOTE: CONSULT LOCAL BUILDING CODES BEFORE RUNNING
SPEAKER WIRES THROUGH WALLS.
NOTE: STRAY STRANDS THAT TOUCH EACH OTHER CAN CAUSE A
SHORT- CIRCUIT THAT CAN DAMAGE THE AMPLIFIER.
2. The speaker’s connector posts are spring-loaded.
Push the top of each connector post down to open the
connector and insert the exposed wires into the holes in
the posts (see Figure 1).
3. The speaker’s positive post is labeled with a red dot; the
negative post is labeled with a black dot.
• The VPXT6R SST has two sets of connection terminals,
located on opposite sides of the crossover board.
4. After making all connections, double-check that you
connected amplier “+” to speaker “+” and amplier “–”
to speaker “–”.
5. Make sure all the Roto-Lock toggle feet are retracted so
that they are tucked within the mounting hole’s border.
Figure 1: Connection Terminals
Figure 2: Roto-Lock Toggle Feet Retracted
Connection Terminals
NOTE: THE ROTO-LOCK SYSTEM CAN ACCOMMODATE A WALL
MATERIAL THICKNESS OF 1 1/4” (32MM) WITH THE TOGGLE
FOOT CAP REMOVED THE SYSTEM CAN ACCOMMODATE A WALL
MATERIAL THICKNESS OF 1 3/4” (44MM). TO REMOVE THE
CLAMP FEET, USE A SMALL SCREWDRIVER TO GENTLY RELEASE
THE LOCKING LEVERS (FIGURE 3, LEFT). THEN REMOVE THE FEET
FROM THE CLAMPS (FIGURE 3, RIGHT).
Figure 3: Removing the Roto-Lock Clamp Feet
VISUAL PERFORMANCE EXTREME SPEAKERS INSTRUCTION MANUAL
6. Insert the speaker into the mounting hole (Figure 4) and
tighten the four screws on the front of the speaker bae.
(Figure 5).
7. The Roto-Lock clamps will automatically rotate into
position and begin clamping the speaker.
8. The Visual Performance Extreme Grille features Sonance
Extreme Post Capture (XPC) technology. XPC holds the
grille in place by several small magnets located on the
posts of the grille and inside the post holes located on
the speaker bae (Figure 6). Place the grille against the
speaker, aligning the grille posts and post holes.
The magnets will pull the grille posts into the post holes
and hold the grille rmly in place. When the grille is
properly installed, the grille trim should make contact
with the mounting surface all the way around the speaker.
Figure 5: Tightening the Roto-Lock Screws
Figure 4: Inserting the Speaker into the Mounting Hole
Figure 6: Attaching the Grille
IMPORTANT: ALWAYS USE LOW-TORQUE SETTINGS WHEN USING A
SCREW GUN; NEVER OVER TIGHTEN.
NOTE: ADJUSTING THE TENSION OF THE ROTO-LOCK CLAMPS SO
THAT THE SPEAKER FRAME IS FLAT WILL HELP ENSURE THAT THE
GRILLE CONTACTS THE WALL ALL THE WAY AROUND THE SPEAKER
FOR A PROPER FIT.
NOTE: EXTREME POST CAPTURE TECHNOLOGY INVOLVES STRONG
MAGNETS THAT MAY CAUSE A FAST CONNECTION WHEN THE
GRILLE IS BEING INSTALLED ONTO THE SPEAKER. TAKE CAUTION
WHEN ALIGNING THE POSTS TO THE HOLES TO PROTECT FINGERS
FROM GETTING CAUGHT.
Roto-Lock
Screws
2
PAINTING THE GRILLES
Sonance Visual Performance Series speaker grilles
completely cover the exposed speaker frame, so only the
grilles (not the speakers themselves) require painting.
1. Prime the grille with a metal primer/bonder in a spray can.
Carefully follow the manufacturerʼs directions on the can.
2. We recommend using water-based latex paint on
the grilles. Thin the paint with a proper thinning agent
to a ratio of 1:1 paint-to-thinner, and strain it through a
standard mesh strainer to remove any lumps.
3. Use a small touch-up gun or cap-spray gun with a #3 tip
for painting.
(A) Set the nozzle with a medium to wide fan.
(B) Set the pressure regulator to 60psi.
(C) Lightly spray the front of the grille in 3 quick strokes
from approximately 10 inches away.
(D) Let the paint set for a minute, then turn the grille 90º
and lightly spray the grille again in 3 quick strokes.
Repeat this step until all four sides of the grille have
been evenly painted.
4. While the paint is still wet, inspect the grille and make
sure that excess paint has not collected underneath the
grille frame, and that none of the grille perforations are
lled with paint. If any are, use compressed air to blow
the paint out of the perforations.
5. Once the paint has thoroughly dried, mount the grille on
the speaker.
IMPORTANT: DUE TO ITS INCREASED DURABILITY, OIL-BASED
PAINT SHOULD BE CONSIDERED FOR VP EXTREME SERIES
SPEAKERS THAT ARE INSTALLED OUTDOORS.
IMPORTANT: IF YOU FIND ANY GRILLE PERFORATIONS THAT ARE
PLUGGED WITH PAINT AFTER THE PAINT HAS DRIED, USE A STRAIGHT
PIN OR SEWING NEEDLE TO CAREFULLY REMOVE THE PAINT.
©2018 Sonance. All rights reserved. Sonance and Visual Performance are registered trademarks of Dana Innovations. Due to continuous product improvement,
all features and specications are subject to change without notice. For the latest Sonance product specication information visit our website: www.sonance.com
SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA • PHONE: (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777 04.27.18
VISUAL PERFORMANCE EXTREME SPEAKERS INSTRUCTION MANUAL
LIMITED FIVE (5) YEAR WARRANTY
Sonance warrants to the rst end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/
Distributor, will be free from defective workmanship and materials for the period stated below. Sonance will at its option and expense during the warranty
period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
EXCLUSIONS
TO THE EXTENT PERMITTED BY LAW, THE WARRANTY SET FORTH ABOVE IS IN LIEU OF, AND EXCLUSIVE OF, ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY SONANCE. ALL OTHER EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, IMPLIED WARRANTY OF FITNESS FOR USE, AND IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED.
No one is authorized to make or modify any warranties on behalf of Sonance. The warranty stated above is the sole and exclusive remedy and Sonance’s
performance shall constitute full and nal satisfaction of all obligations, liabilities and claims with respect to the Product.
IN ANY EVENT, SONANCE SHALL NOT BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, ECONOMIC, PROPERTY, BODILY INJURY, OR PERSONAL
INJURY DAMAGES ARISING FROM THE PRODUCT, ANY BREACH OF THIS WARRANTY OR OTHERWISE.
This warranty statement gives you specic legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion
of implied warranties or limitations of remedies, so the above exclusions and limitations may not apply. If your state does not allow disclaimer of implied
warranties, the duration of such implied warranties is limited to period of Sonance’s express warranty.
Your Product Model and Description: VPXT6 or VPXT6R or VPXT6R SST or VPXT8R.
Warranty Period for this Product: Five (5) years from the date on the original sales receipt or invoice or other satisfactory proof of purchase.
Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the initial installation
of the Product, does not include installation of any repaired or replaced Product, does not include damage to allied or associated equipment which may
result for any reason from use with this Product, and does not include labor or parts caused by accident, disaster, negligence, improper installation, misuse
(e.g. overdriving the amplier or speaker, excessive heat, cold or humidity), or from service or repair which has not been authorized by Sonance. Obtaining
Authorized Service: To qualify for the warranty, you must contact your authorized Sonance Dealer/Installer or call Sonance Customer Service/Technical
Support at (949) 492-7777 within the warranty period, must obtain a return merchandise number (RMA), and must deliver the Product to Sonance shipping
prepaid during the warranty period, together with the original sales receipt, or invoice or other satisfactory proof of purchase.
3
VPXT6
Tweeter 1”(25mm)polyurethanedome,Ferrouidcooled,
inacousticbackchamber
Woofer 61/2”(165mm)injection-moldedpolypropylene/
graphitecone,withintegralSantoprene
™surround
FrequencyResponse 45Hz-20kHz±3dB
Impedance 8ohmsnominal;6ohmsminimum
PowerHandling 5wattsminimum;125wattsmaximum
Sensitivity 89dBSPL(2.83V/1meter)
Environmental ConformstoMilitaryStandard810Gforhumidity,
saltspray,temperature&UV,IP-66waterproofrating
EnvironmentTemp -30º-175ºF(-34ºC-79ºC)
SpeakerDepth 21/2”(64mm)
Dimensions 83/8”x121/4”(213mmx311mm)
Cut-OutDimensions 615/16”x103/4”(176mmx273mm)
GrilleMaterial Powder-coatedstainlesssteel
ShippingWeight 12lbs(5.4kg)pair
VPXT6R
Tweeter 1” (25mm) polyurethane dome,
Ferrouidcooled,inacousticbackchamber
Woofer 61/2”(165mm)injection-moldedpolypropylene/
graphitecone,withintegralSantoprene
™surround
FrequencyResponse 45Hz-20kHz±3dB
Impedance 8ohmsnominal;6ohmsminimum
PowerHandling 5wattsminimum;125wattsmaximum
Sensitivity 89dBSPL(2.83V/1meter)
Environmental ConformstoMilitaryStandard810Gforhumidity,
saltspray,temperature&UV,IP-66waterproofrating
EnvironmentTemp -30º-175ºF(-34ºC-79ºC)
SpeakerDepth 31/2”(89mm)
Dimensions 93/4”(248mm)
Cut-OutDimensions 81/4”(210mm)
GrilleMaterial Powder-coatedstainlesssteel
ShippingWeight 12lbs(5.4kg)pair
VPXT6R SST
Tweeter 1”(25mm)polyurethanedome,dualvoicecoil,
Ferrouidcooled,inacousticbackchamber
Woofer 61/2”(165mm)injection-moldedpolypropylene/
graphitecone,withintegralSantoprene™surround
FrequencyResponse 45Hz-20kHz±3dB
Impedance 8ohmsnominal;6ohmsminimum
PowerHandling 5wattsminimum;125wattsmaximum
Sensitivity 89dBSPL(2.83V/1meter)
Environmental ConformstoMilitaryStandard810Gforhumidity,
saltspray,temperature&UV,IP-66waterproofrating
EnvironmentTemp
SpeakerDepth
Dimensions
Cut-OutDimensions
GrilleMaterial
ShippingWeight
VPXT8R
Tweeter
Woofer
-30º-175ºF(-34ºC-79ºC)
31/2”(89mm)
93/4”(248mm)
81/4”(210mm)
Powder-coatedstainlesssteel
6. lbs( kg)each7 3.04
1”(25mm)polyurethanedome,Ferrouidcooled,
inacousticbackchamber
8”(205mm)injection-moldedpolypropylene/
graphitecone,withintegralSantoprene™surround
FrequencyResponse 40Hz-20kHz±3dB
Impedance 8ohmsnominal;6ohmsminimum
PowerHandling 5wattsminimum;130wattsmaximum
Sensitivity 90dBSPL(2.83V/1meter)
Environmental ConformstoMilitaryStandard810Gforhumidity,
saltspray,temperature&UV,IP-66waterproofrating
EnvironmentTemp -30º-175ºF(-34ºC-79ºC)
SpeakerDepth 33/4”(95mm)
Dimensions 115/8”(295mm)
Cut-OutDimensions 101/8”(257mm)
GrilleMaterial Powder-coatedstainlesssteel
ShippingWeight 14lbs(6.35kg)pair
Produkspesifikasjoner
| Merke: | Sonance |
| Kategori: | Høyttaler |
| Modell: | Visual Performance Extreme VPXT8R |
Trenger du hjelp?
Hvis du trenger hjelp med Sonance Visual Performance Extreme VPXT8R still et spørsmål nedenfor, og andre brukere vil svare deg
Høyttaler Sonance Manualer
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
2 Januar 2025
16 Oktober 2024
Høyttaler Manualer
- Høyttaler Aiwa
- Høyttaler Bauhn
- Høyttaler LG
- Høyttaler Power Dynamics
- Høyttaler Vonyx
- Høyttaler Grundig
- Høyttaler AOC
- Høyttaler Philips
- Høyttaler IKEA
- Høyttaler Edifier
- Høyttaler Teufel
- Høyttaler Fender
- Høyttaler Kogan
- Høyttaler Soundcore
- Høyttaler Turbosound
- Høyttaler Sony
- Høyttaler GoGEN
- Høyttaler Yamaha
- Høyttaler Morel
- Høyttaler Axis
- Høyttaler Extron
- Høyttaler Media-tech
- Høyttaler Pioneer
- Høyttaler EarFun
- Høyttaler KEF
- Høyttaler Audio-Technica
- Høyttaler Toa
- Høyttaler Pyle
- Høyttaler Sencor
- Høyttaler Bose
- Høyttaler Orava
- Høyttaler Kanto
- Høyttaler JVC
- Høyttaler Kicker
- Høyttaler Auna
- Høyttaler OSD Audio
- Høyttaler Fenton
- Høyttaler MB Quart
- Høyttaler Aplic
- Høyttaler CSL
- Høyttaler Bearware
- Høyttaler Maginon
- Høyttaler Advance
- Høyttaler Artsound
- Høyttaler Ion
- Høyttaler Elac
- Høyttaler Yorkville
- Høyttaler V-Tac
- Høyttaler Braun
- Høyttaler JBL
- Høyttaler Infinity
- Høyttaler Majority
- Høyttaler Genesis
- Høyttaler Logilink
- Høyttaler Klipsch
- Høyttaler Karma
- Høyttaler Match
- Høyttaler Renkforce
- Høyttaler Definitive Technology
- Høyttaler QSC
- Høyttaler WHD
- Høyttaler Q Acoustics
- Høyttaler Karcher
- Høyttaler GoldenEar
- Høyttaler FoneStar
- Høyttaler Trevi
- Høyttaler Monitor Audio
- Høyttaler Canton
- Høyttaler Fresh N Rebel
- Høyttaler Sven
- Høyttaler Energy Sistem
- Høyttaler PSB
- Høyttaler Vizio
- Høyttaler Polk
- Høyttaler ESX
- Høyttaler Omnitronic
- Høyttaler MEE Audio
- Høyttaler Monacor
- Høyttaler ModeCom
- Høyttaler Hercules
- Høyttaler Black Hydra
- Høyttaler Electro-Voice
- Høyttaler Wharfedale
- Høyttaler Boss
- Høyttaler Tannoy
- Høyttaler Atlas Sound
- Høyttaler Mount-It!
- Høyttaler GMB Audio
- Høyttaler Mad Dog
- Høyttaler Ashly
- Høyttaler Memphis Audio
- Høyttaler Focal
- Høyttaler Alpine
- Høyttaler Boompods
- Høyttaler Genelec
- Høyttaler Bazooka
- Høyttaler Lamax
- Høyttaler Aiaiai
- Høyttaler RCF
- Høyttaler N-Gear
- Høyttaler Vimar
- Høyttaler Atlas
- Høyttaler PowerBass
- Høyttaler Prime3
- Høyttaler Duronic
- Høyttaler Harman Kardon
- Høyttaler Lexibook
- Høyttaler Ibiza Sound
- Høyttaler Aconatic
- Høyttaler DAP Audio
- Høyttaler Sonus Faber
- Høyttaler Xcellon
- Høyttaler OWI
- Høyttaler Titanwolf
- Høyttaler Weather X
- Høyttaler HK Audio
- Høyttaler Phoenix Gold
- Høyttaler Krüger And Matz
- Høyttaler Indiana Line
- Høyttaler Yamazen
- Høyttaler Lexon
- Høyttaler Blue Tees
- Høyttaler BASSBOSS
- Høyttaler House Of Marley
- Høyttaler Tangent
- Høyttaler FBT
- Høyttaler Transparent
- Høyttaler IHome
- Høyttaler Martin Logan
- Høyttaler Andover
- Høyttaler Grimm Audio
- Høyttaler Klark Teknik
- Høyttaler Phonic
- Høyttaler BlueAnt
- Høyttaler Taga Harmony
- Høyttaler SoundTube
- Høyttaler James
- Høyttaler MB
- Høyttaler Devialet
- Høyttaler Lenco
- Høyttaler Heco
- Høyttaler Boston Acoustics
- Høyttaler Crest Audio
- Høyttaler M-Audio
- Høyttaler Berker
- Høyttaler Nikkei
- Høyttaler Eve Audio
- Høyttaler Delvcam
- Høyttaler Cerwin-Vega
- Høyttaler Ikegami
- Høyttaler New One
- Høyttaler Mission
- Høyttaler Califone
- Høyttaler Audibax
- Høyttaler ILive
- Høyttaler Moonki
Nyeste Høyttaler Manualer
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 Januar 2025