Soundskins SSK-STRIP Bruksanvisning

Les nedenfor 📖 manual på norsk for Soundskins SSK-STRIP (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
Foam Tape
installation
instructions
Alcohol based cleaner
& microfiber towel
Sharp blade or
scissors Roller
R
Prepping the Surface
Start by getting all metal surfaces clean from dust, oil, wax and moisture.
We recommend using a microfiber cloth and an alcohol based cleaning
solution such as denatured alcohol or Invisible Glass. If you have rust, it may
require a bit more attention to ensure the material will stick well. Once all the
surfaces have been prepped and air dried, you can start applying the
material.
Installation
Remove a small section of the backing paper from the foam tape and tack
it into place of the area you would like to cover.
Then, cut the strip to your required size and remove the remainder of the
backing paper.
Last, press or wrap the adhesive side of the foam tape firmly into place, and
repeat this process as needed.
If you have any questions, don’t hesitate to contact us using the information
provided below.
SoundSkins Global USA
(877)211-5597
usa@SoundSkinsGlobal.com
www.SoundSkinsGlobal.com ®2024 SoundSkins Global, All Rights Reserved
@soundskinsglobal
All required tools

Produkspesifikasjoner

Merke: Soundskins
Kategori: Ikke kategorisert
Modell: SSK-STRIP

Trenger du hjelp?

Hvis du trenger hjelp med Soundskins SSK-STRIP still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Soundskins Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer