StarTech.com MR12GI-NETWORK-CARD Bruksanvisning

StarTech.com Nettverkskort/adapter MR12GI-NETWORK-CARD

Les nedenfor 📖 manual på norsk for StarTech.com MR12GI-NETWORK-CARD (2 sider) i kategorien Nettverkskort/adapter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: December 13, 2023
Product Diagram (MR12GI-NETWORK-CARD)
M.2 Network Card
CAT6 Cable Adapter
Port/LED/Connector Function
1M.2 Connector
Insert the into a M.2 Network Card M.2 PCI Express
Slot Host Computer on the
Supports or B Key M Key Slots
2Ethernet Port Connect the CAT6 Cable Adapter
3LED Indicators
Right LED Indicator Link Speed is
Solid Green: 2.5 Gbps
Solid Amber: 1 Gbps
O: 100 or 10 Mbps
Left LED Indicator Link Status is
Solid Green: Active link
Flashing Green: Activity
M.2 2.5GBase-T Ethernet Network Card - PCIe 2.0
4RJ45 Connector Insert into the on the Ethernet Port M.2 Network
Card
5Bracket Mount
Screw-in design for securing the CAT6 Cable Adapter
onto the or Full Prole Low Prole Bracket
(not pictured)
6Ethernet Port
Connect a to the Network Cable CAT6 Cable
Adapter
Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps
Package Contents
M.2 Network Card x 1
CAT6 Cable Adapter x 1
Full Prole Bracket x 1
Low Prole Bracket x 1
Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/MR12GI-NETWORK-CARD
Host computer with an available B or M key M.2 PCI Express slot
Phillips head screwdriver
Installation
Install the M.2 PCI Express Card
WARNING!
Static Electricity can severely damage Expansion Cards. Ensure that you are
adequately Grounded before you open your Host Computer Case or touch the
Expansion Card. You should wear an Anti-Static Strap or use an Anti-Static Mat
when installing any Host Computer component. If an Anti-Static Strap isn’t available,
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the Expansion Card by its edges and don’t touch the
gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
3
1
2
4
6
*Product may vary from image
5
4. Remove the from the . Consult the documentation that Cover Host Computer Case
came with the for details about doing this safely.Host Computer
5. Locate an open and remove the corresponding M.2 PCI Express Slot Slot Cover
Plate Host Computer Case from the back of the .
Note: Consult the documentation that came with the Host Computer for details about
doing this safely.
This card works in B Key or M Key M.2 PCI Express Slots.
6. Gently insert the into the open . Secure it M.2 PCI Express Card M.2 PCI Express Slot
using a and the included . Phillips Head Screwdriver Screw
7. Remove the (x 2) from the . Secure the to the Screws Bracket Mount Bracket Mount
Full Low Prole Bracket Phillips Head Screwdriver Screwsor using a and the (x 2).
8. Connect the into the on the CAT6 Cable Adapter Ethernet port
M.2 Network Card.
9. Fasten the or using a to the Full Low Prole Bracket Phillips Head Screwdriver
back of the .Host Computer Case
10. Return the onto the .Cover Host Computer Case
11. Reconnect the to the back of the .Power Cable Host Computer
12. Reconnect all of the disconnected in .Peripheral Devices Step 3
13. Turn on the and .Host Computer Peripheral Devices
14. Connect an to the on the .Ethernet Cable Ethernet Port CAT6 Cable Adapter
Download the Driver
1. Navigate to www.startech.com/PR12GI-NETWORK-CARD
2. Click the tab.Drivers & Downloads
3. Under , download the for Windows.Driver(s) Driver Package
Note: Windows usually saves the les to the Downloads folder associated with the
user account (e.g. C:\Users\useraccount\Downloads).
4. the zipped that was downloaded. Click . Right-click Driver Package Extract All
Follow the on-screen instructions to the les. Extract
Note: Ensure to make a note of the location where the drivers were extracted. That
location will be used in later steps.
5. Follow the instructions on the accompanying le for further Intel_Windows_DIG
Installation Instructions.
Verify the Driver Installation
Windows
1. Navigate to the .Device Manager
2. Under , right-click and click Network Adapters Intel Ethernet Controller I225-V
the option.Properties
3. Conrm that the is installed and working as expected.Driver
Linux
Note: Ensure kernel 5.8 or higher (LTS versions only) is being used. Execute the
following command from the terminal prompt to check the kernel version, uname -r.
1. Open a and type the command to Terminal Window sudo dmesg | grep Intel
check the Intel Driver Integration.
2. You should see the following response if the drivers are present, Intel(R) 2.5G
Ethernet Linux Driver.
Quick-Start Guide
FR
À DÉPOSER
EN MAGASIN À DÉPOSER
EN DÉCHÈTERIE
OU
FR
Cet appareil,
ses accessoires
et piles
se recyclent
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Warranty Information
This product is backed by a two years warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,
loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,
the limitations or exclusions contained in this statement may not apply to you.

Produkspesifikasjoner

Merke: StarTech.com
Kategori: Nettverkskort/adapter
Modell: MR12GI-NETWORK-CARD

Trenger du hjelp?

Hvis du trenger hjelp med StarTech.com MR12GI-NETWORK-CARD still et spørsmål nedenfor, og andre brukere vil svare deg