StarTech.com OR41GI-NETWORK-CARD Bruksanvisning
StarTech.com
Nettverkskort/adapter
OR41GI-NETWORK-CARD
Les nedenfor 📖 manual på norsk for StarTech.com OR41GI-NETWORK-CARD (2 sider) i kategorien Nettverkskort/adapter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: May 9, 2024
Product Diagram
OR41GI-NETWORK-CARD
Port/LED/Connector Function
1Pull Tab • Pull to remove the from the Server Network Card
OCP NIC 3.0 Slot
2RJ45 Port x 4
• Connect a to theNetwork Cable Server Network
Card
• Supports 1 Gbps, 100 Mbps, and 10 Mbps
3LED Indicators
• Left LED Indicator Link Speed is
• Solid Green: 1 Gbps
• Solid Amber: 10/100 Mbps
• Right LED Indicator Link Status is
• Solid Green: Active link
• Flashing Green: Activity
44C+ Connector
(OCP NIC 3.0) • Insert into an on the OCP NIC 3.0 Slot Host Server
5Locking Screw • Secure the card to the Host Server Case
4-Port RJ45 Gigabit OCP 3.0 Server Network Card
Package Contents
• OCP NIC 3.0 Network Card x 1
• Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/OR41GI-NETWORK-CARD
• Host server with an available OCP NIC 3.0 slot
Installation
Install the Server Network Card
WARNING!
Static Electricity can severely damage . Ensure that you are adequately Network Cards
grounded Host Server Case Server Network Card before you open your or touch the .
You should wear an or use an when installing any Anti-Static Strap Anti-Static Mat
computer component. If an isn’t available, discharge any built-up Anti-Static Strap
static electricity by touching a large for several seconds. Only Grounded Metal Surface
handle the by its edges and do not touch the gold connectors.Server Network Card
1. Turn o the and any that are connected to it (e.g. Host Server Peripheral Devices
printers, external hard drives, etc.).
2. Unplug the from the back of the , and disconnect any Power Cable Host Server
Peripheral Devices that are connected.
3. Remove the from the . Consult the documentation that came with Cover Server Case
the for details about doing this safely.Host Server
4. Locate an open and remove the corresponding OCP NIC 3.0 Slot Slot Cover Plate
from the back of the .Host Server
5. Gently insert the into the . Turn the Server Network Card OCP NIC 3.0 Slot Locking
Screw Server Network Card Server Case/Chassisto attach the to the back of the .
6. Return the onto the .Cover Host Server
7. Connect one or more to the on the Network Cable/s RJ45 Ports Server Network
Card.
8. Reconnect all of the disconnected in .Peripheral Devices Step 2
9. Reconnect the to the back of the .Power Cable Host Server
10. Turn on the and .Host Server Peripheral Devices
3
4
2
5
1
*Product may vary from image
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com
could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price
paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement may not apply to you.
Safety Measures
• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.
Mesures de Sécurité
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser
ce produit.
安全対策
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。
Misure di Sicurezza
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare
questo prodotto.
Säkerhetsåtgärder
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten.
Medidas de Seguridad
• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el
uso de este producto.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
FR
À DÉPOSER
EN MAGASIN À DÉPOSER
EN DÉCHÈTERIE
OU
FR
Cet appareil,
ses accessoires
et piles
se recyclent
Download the Driver
1. Navigate to www.startech.com/OR41GI-NETWORK-CARD
2. Click the tab.Drivers & Downloads
3. Under , download the .Driver(s) Driver Package
Install the Driver
Windows
1. Right-click the zipped that was downloaded. Click Follow Driver Package Extract All.
the on-screen instructions to extract the les.
Note: Windows usually saves the les to the Downloads folder associated with the user
account (e.g. C:\Users\useraccount\Downloads)
2. Follow the instructions on the accompanying le for further Intel_Windows_DIG
Installation Instructions.
Linux
1. Extract the contents of the . Driver Package
2. Follow the instructions on the accompanying le for further README Installation
Instructions.
Quick-Start Guide
Verify the Driver Installation
Windows
1. Navigate to the .Device Manager
2. Under , right-click Network Adapters Intel(R) I350 Gigabit Network Connection
and click the option.Properties
3. Conrm that the is installed and working as expected.Driver
Linux
Note: Ensure Linux kernel 2.4 (LTS) or higher is being used. Execute the following
command from the terminal prompt to check the kernel version, uname -r.
1. Open a and type the command to Terminal Window sudo dmesg | grep Intel
check the Intel Driver Integration.
2. You should see the following response if the drivers are present, Intel(R) Gigabit
Network Driver.
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Nettverkskort/adapter |
| Modell: | OR41GI-NETWORK-CARD |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com OR41GI-NETWORK-CARD still et spørsmål nedenfor, og andre brukere vil svare deg
Nettverkskort/adapter StarTech.com Manualer
17 Desember 2024
23 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Nettverkskort/adapter Manualer
- Nettverkskort/adapter Hama
- Nettverkskort/adapter TP Link
- Nettverkskort/adapter Extron
- Nettverkskort/adapter Digitus
- Nettverkskort/adapter Cambium Networks
- Nettverkskort/adapter Crestron
- Nettverkskort/adapter Rocstor
- Nettverkskort/adapter Edimax
- Nettverkskort/adapter Twelve South
- Nettverkskort/adapter Vantec
- Nettverkskort/adapter ZyXEL
- Nettverkskort/adapter Xcellon
- Nettverkskort/adapter Ernitec
- Nettverkskort/adapter AViPAS
- Nettverkskort/adapter EQ-3
- Nettverkskort/adapter Sonnet
- Nettverkskort/adapter Vivolink
Nyeste Nettverkskort/adapter Manualer
17 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
12 Desember 2024
12 Desember 2024