Taiji CP-940 Bruksanvisning

Taiji Ikke kategorisert CP-940

Les nedenfor 📖 manual på norsk for Taiji CP-940 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

INSTRUCTION MANUAL

Thank you for purchasing the

Taiji cooling plate.

CAUTION:

To use this product safely and

properly, carefully read and fully

understand this instruction

manual before use.

■ Please peruse these “Safety Precautions” carefully so that you can use your

product in the proper way.

■ Please keep these “Safety Precautions” handy for future reference after being read.

■ The precautionary measures referred to herein are matters that should be abided by

for safe use and to prevent harm and/or damage being inflicted on yourself or others.

Furthermore, the particulars of the precautionary measures have been classified into

categories of “Warning” and “Caution” so as to express the degree or extent of

conceivable harm and damage that can be assumed to occur from mishandling.

The categories are both of importance as far as safety is concerned and should be

strictly abided by.

WARNING

CAUTION

Assumed to possibly result in death or serious injury

Assumed to possibly result only in bodily injury or physical damage

△ indicates “Warning and caution is urged.”

(The one on the left indicates “Beware of electrical shock.”)

　 indicates “Forbidden.”

(The one on the left indicates that disassembly is forbidden.)

A “●” mark indicates “Instructions,” which should be followed by all means.

(The one on the left indicates that grounding is a requirement.)

■ The precautionary measures that should be abided by are expressed via certain

marks and are explained as follows:

Safety Precautions

COOL PLATE

１

Holding the

plug while

removing it

→

CAUTION

Caution

Eliminating

moisture

When not

in use

→

Removing

the plug

→

Forbidden

Cleaning

the filter

Forbidden

Purpose of Use

This device is a cooling plate for use indoors only, designed for the purpose of

food cold storage and for food display. If you intend to use the product for

purposes other than for cooling food, please consult with us.

Operational Mechanism

Designation of Parts

Keeping

clearance

Forbidden:

Disassembly

Grounding

connection

WARNING

Forbidden:

Dousing

the device

with water

(1) This device is to be set upon a stable and flat location and

not to be moved while the plug is connected to power source.

Otherwise, abnormal performance could result.

(2) This device should never be disassembled, repaired, or modified

by anyone other than a repair technician.

Otherwise, fire or abnormal performance could result.

(3) Ensure a proper ground.

Imperfect grounding could lead to electric shock.

(4) Do not immerse this device in or douse it with water.

Otherwise, electric shock or a short-circuit could occur.

(5) Periodically confirm that the plug contacts are kept clean and

that they are firmly inserted into the power outlet.

Dust accumulation or imperfect contact could be the cause of

an electric shock or fire.

(6) Handle the power cord with care.

In case the power cord is processed, pulled, bundled, or a heavy

item is placed upon or squeezes it, the cord is apt to be damaged

and could cause electric shock or fire. The power cord should

not come into contact with a heat source.

(7) Ensure that the power source is from a dedicated outlet at AC

230V rated for at least 15A. Using branched sockets could be

the cause of abnormal heat, fire, etc.

(8)

Do not intentionally bend plug contacts to prevent the plug from

dropping out of the electric outlet. Imperfect contact could cause fire.

(9) In the event of abnormal odor or sound, the emission of smoke,

or in case water or a foreign substance should happen to enter

the cabinet, switch off the unit immediately and remove the plug

from the electric outlet.

Otherwise, electric shock and outbreak of fire could result.

(10) Do not touch or manipulate electrical parts such as the plug,

power source switch, etc., with wet hands. Otherwise, electric

shock could occur.

(11) Do not use this device outdoors. Using the product where rainfall

is present could cause electric leakage and/or electric shock.

Attention

required

for setting

Inspection

and

cleaning

Forbidden:

Wet hands

Forbidden

Forbidden:

Many loads

on one

electrical

outlet

Forbidden

Removing

the plug

→

Forbidden:

Usage

outdoors

WARNING

Attention

required

for using

Forbidden

Standard plate

Body

Front view Rear view

Bottom view * If you use the Acrylic case/DCR frame,

also check the specially prepared leaflet.

Model

CP-940

series

CP-940(GW): with White Glass

CP-940(GK): with Black Glass

CP-940(IB): with Acrylic case/

DCR frame

CP-940: Standard Plate

Plug

Power switch

Power cord

CP-940(GW)(GK)

CP-940(IB)

Glass top plate

Acrylic case/DCR frame

Air inlet

Exhaust outlet

(12) The disposal of this product should be performed by a specialized

contractor, a public agency, or the distributor from where the

product was purchased. (A disposal fee usually applies.) Disposal

at random could result in third-party usage for purposes other

than a food cooler, which could result in an unexpected accident.

(13) Do not allow children to use this device, and do not use it within

reach of children. Otherwise, electric shock or injury could occur.

(1) Hold the plug and not the cord when removing the plug from the

electric outlet. Not doing so could result in electric shock or fire.

(2) Do not drop this product or allow it to sustain severe shock.

Otherwise, device failure or fire may result.

(3) Discard immediately the polyethylene bag that the product was

packed inside. Keep it out of reach of children so as to prevent

incidents of suffocation.

(4) Remove the plug from the electric outlet as soon as thunder is

heard. In the event of a nearby lightning strike, abnormal

current/abnormal voltage could infiltrate through the power

source line, etc., and could possibly damage the product.

(5)

Switch off and remove the plug from the electric outlet when not in

use. Otherwise, electric shock or an electrical fire, etc., could result.

(6) Do not use the device when the power cord or plug is damaged

or when the electric outlet is loose. Usage under such conditions

could cause electric shock, short-circuit, fire, etc.

(7) Do not place heavy items on top of this product or bump

something against it. Otherwise, damage, injury, short-circuit,

electric shock, corrosion, or device failure, etc., may occur.

(8) Keep clearance around the product (100 mm or more).

The heat of the exhaust air can cause damage.

(9)

Clean the filter periodically (about once a month).

Failure to do so can cause insufficient heat release, leading a failure.

(10) Wipe off any moisture within the case as well as the body after

use and remove any foreign substances. Leaving moisture or

substances inside could cause rust and the deterioration of

cooling performance. It will also lead to malfunctioning when

used thereafter.

(11) Do not put any heavy object on the glass plate

(for the glass type only) or bump something against it.

This product cools food by activating the Peltier unit attached to the plate surface

so as to cool the plate surface to approximately 7°C. (This is the temperature at

the center of the plate surface in the condition where the room temperature is

25°C and where there is a sufficient clearance around the product.)

* The Peltier unit is the heat exchange unit that utilizes a Peltier element,

which is a type of semiconductor.

Forbidden:

Disposal

Checking Prior to Use and Setting

1. Rem e the product from the packing carton and make sure that the Instruction ov

Manual and the acc sories are included.es

2. Set up the device as per the following situation:

● At a place where the device can be flat and stable.

●

At a place where the device is not affected by heat; avoid places with direct sunlight and avoid

places near stoves, microwaves, etc. (to be set away from such units by at least 500 mm).

●

Away fro ism mo t places or where the device is susceptible to being splashed with water

● At a place where there i acs sp e all around the device, so as to allow for ventilation.

● Do not block the air inlets on the front and bottom sides of the main unit. Al do not so

block the exhaust outlet on the rear side of the main unit.

● Keep space of 100 mm or more for clearance between the rear side of the main unit

and the wall or obstacles, so as to prevent heat from being accumulated.

* If the temperature around the air inlet rises, the cooling temperature will rise or failure can result.

* Th men one di si s of the clearance shown in the figure are the minimum required fo nstallation.r i

1. As shown in the side view of the dime onnsi s of the opening below, an opening of

780 mm or more in wi h andt d 230 mm or more in depth is n deee d for the bottom side

(which has the air inlet).

Prepare the opening by positioning the side of the opening at 70 mm from the front

side of the main unit.

2. As shown in the rear view of the dime ons nsi

of opening below, an opening of 860 mm or

more in width and 65 mm or more in height is

needed for the rear side (which has the

exhaust outlet).

Prepare the opening by positioning the side of

the opening at 30 mm from the floor.

８

Post-u ns uctionsse I tr

1. Switch the device off and remove the plug from electric outlet.

2. Wipe of thf e liquid or dirt attached to the main unit, plate surface, glass plate surface,

or Acrylic case/DCR frame using a dry cloth or a firmly squeezed wet cloth.

* If you use a sponge, use a soft one to prevent scratching.

If you use a detergent, use a ne raut l detergent.

* As the Acrylic case/D framCR e is easy to be damaged, be careful when handling it.

* To provide good performance, the frequent cleaning of the filter is necessary.

Check whether the filter of the air inlet on the bottom side of the main unit is not clogged

with dirt. If it is clogged, remove the filter, and suck in the dirt by using a vacuum cleaner.

(1703Ａ)

Product Specifications and Circuit Diagram

Circuit Diagram

Sequence of Usage

Pull out the filter forward or backward.

* 420 mm or more of c arance from le

the main unit is needed to pull

out the filter.

100ｍm

austh

out et

E austxh

outlet

Air inlet

Front side

(to be open)

Side viewFront view

Model

CP-940

Rated voltage

Single-phase 230V, 50/60Hz

Power consumption

450W

Pe ier elementlt

Plate temperature

Ｗｍｍ940 ×Ｄｍｍ440 ×H122ｍｍ

Weight

Thermo label seal, plus others (depending on your selection of optional items)

* P ase note that s cifications and appearance are subject to change thout prior notice, le pe wi

for improvement.

For built-in use

CP-940

CP-940(GW)(GK)

CP-940(IB) Ｗｍｍ940 ×Ｄｍｍ440 ×H213ｍｍ

17ｋｇ

21.5ｋｇ

24.0ｋｇ

7°C ± 5°C (35 to 53°F) (when the am ent temperaturbi e is 25°C)

W900ｍｍ×D400ｍｍ

Plate dimen onssi

CP-940

CP-940(GW)(GK)

CP-940(IB)

Accessories

FAN

Peltier

e mentle

Peltier

e mentle

Peltier

e mentle

Power switch

Fan

AC230V

FAN FAN

Contro boardl

Control

board

The filte c be r an

pulled out either

forward r o backward.

780ｍm or more

230ｍｍ

or more

70ｍｍ

Opening Opening

860ｍm or more

65ｍｍ

or more

30ｍｍ

20ｍｍ

■ Dimensions of opening

on the rear side

■ Dimensions of the opening

on the bottom side

For after sales service, call the store where you have purchased your cool plate,

or nearest TAIJ saleI s representative or TAIJI & CO., LTD. in Japan.

If the supply cord s i damaged it must b, e replaced by th manufacturere , its service

agent similarl or y qualified persons in order to avoid a hazard.

TAIJI & CO., LTD.

8-2, Okawa-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-0858 Japan

TEL : +81-44-329-6338 FA +81-44, X : -326-5860

E-mail : overseas@taiji.co.jp

UR http://L : www.taiji.co.jp/e

After-Purchase Servicing

1. If fluid or foreign materials remain on the surface of the plate or the glass plate, remove them

with a dry towel, etc.

* If li uiq d, etc., remains, fa uril e or malfunction can result.

2. Turn on the p eow r s tchwi . The Peltier unit is activated and cooling is started.

* The fan is rotated, and exhaust heat is discharged from the rear side of the main unit.

* If you use the Acrylic case/DCR frame, place it in the correct position.

3. Perform a pre mli inary operation with no food for about one hour, check that the plate is cool,

and then operate the product for actual use.

This device is used for keeping foods cool. Therefore, as a preliminary operation turn the ,

p eow r ON to cool the plate surface, and then use food that has been cooled in advance.

● The indication of cooling temperature is the temperature at the center of the plate surface

in the condition where the room temperature is 25°C (77°F), the device is operated with

no food on it, and the temperature becomes stable.

* The temperature of the plate surface changes depending on the room temperature or

the u gsa e co ions.ndit

When measuring the temperature of the plate

● Measure the temperature by attaching the supplied thermo label seal to the plate surface.

● The current temperature is indicated in green figures.

Measuring range:

From approx atelim y -6°C (-21°F) to 14°C (57°F)

Digital thermo label

D-16

℃

Current temperature

Cooling method

Outer dimensions

Filter

Produkspesifikasjoner

Merke:	Taiji
Kategori:	Ikke kategorisert
Modell:	CP-940

Trenger du hjelp?

Hvis du trenger hjelp med Taiji CP-940 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert Taiji Manualer

Taiji OSL-600 Bruksanvisning

15 Januar 2025

Taiji CP-940 Bruksanvisning

15 Januar 2025

Taiji HC-6 Bruksanvisning

5 Januar 2025

Taiji HC-11UV Pro Bruksanvisning

5 Januar 2025

Taiji HC-38UV Bruksanvisning

5 Januar 2025

Taiji HC-8 Bruksanvisning

5 Januar 2025

Taiji HC-21UV Pro Bruksanvisning

5 Januar 2025

Taiji HC-11LX Pro Bruksanvisning

5 Januar 2025

Taiji CC-8 Bruksanvisning

5 Januar 2025

Taiji HC-21LX Pro Bruksanvisning

5 Januar 2025

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Amazfit Bip 5 Unity Bruksanvisning

16 Januar 2025

Lowepro Flipside Trek BP 350 AW II Bruksanvisning

16 Januar 2025

Audison Prima APS 8 D Bruksanvisning

16 Januar 2025

Black Line BLMH 36 Bruksanvisning

16 Januar 2025

Absco M 151151 Bruksanvisning

16 Januar 2025

ADDAC System ADDAC200CT Bruksanvisning

16 Januar 2025

Emerio LR-131325.1 Bruksanvisning

16 Januar 2025

Sony WRT-822B Bruksanvisning

16 Januar 2025

IKEA SMÅSPORRE 204.570.22 Bruksanvisning

16 Januar 2025

IKEA SÄFFEROT 904.570.71 Bruksanvisning

16 Januar 2025