Wasp WCS3905 Bruksanvisning
Wasp
Strekkodeleser
WCS3905
Les nedenfor 📖 manual på norsk for Wasp WCS3905 (41 sider) i kategorien Strekkodeleser. Denne guiden var nyttig for 10 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/41
WCS 3900/3905
Programming Guide
Please Read
Note:
The Wasp WCS 3900 / 3905 Scanners are ready to scan
the most popular bar codes out of the box. This manual
should onl be used to make changes in they
configuration of the scanner for specific applications.
These scanners do not require software or drivers to
operate. The scanner enters data as keyboard data. Please
review this manual before scanning any of the programming
bar codes in this manual.
Tech Tip
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan the default
bar code on page 6. This will reset the scanner to its
factory settings.
Check Version
© Copyright Wasp Technologies 2006
Version 2.54
No part of this publication may be reproduced or transmitted in any form or
by any means without the written permission of Wasp Technologies. The
information contained in this document is subject to change without notice.
Wasp is a tr Wasp Technologies. All other trademarks or registered trademarks are theademark of
property of their respective owners.
Table of Contents
Chapter 1. Introduction ..............................................................................1
Chapter 2. Bar Code Symbologies............................................................2
Chapter 3. Installation................................................................................3
Chapter 4. Quick Start.............................................................................. 4
Chapter 5. Setup & Configuration ........................................................5-28
1. Factory Default & Keyboard Connection ....................6
2. Autosense Stand Mode ..............................................6
3. Beep and Delay ......................................................7-8
4. Upper/Lower Case......................................................9
5. Keyboard Language ................................................10
6. Preamble/Postamble Configuration ..........................11
7. Terminator/Code ID ..................................................12
8. Enable/Disable Bar Code Symbologies ..............13-14
9. Bar Code Symbology Settings ............................15-27
Code 39 ..........................................................15
Interleaved 2 of 5 and Code 93 ......................16
Code 128 and UCC/EAN 128..........................17
MSI/Plessey ....................................................18
Codabar ..........................................................19
UPC-A..............................................................20
UPC-A Supplemental / UPC-A to EAN-13 ......21
UPC-E..............................................................22
UPC-E Supplemental ......................................23
EAN-8 ..............................................................24
EAN-8 Supplemental ......................................25
EAN-13 ............................................................26
EAN-13 Supplemental ....................................27
Appendix A Bar Code Test Symbols ....................................................28-30
Appendix B ASCII Table 31-34
Appendix C Codes for PC 35
Appendix D Technical Specifications 36
Product Support ....................................................................37
Warranty ................................................................................37
Frequently Asked Questions..................................................38
Produkspesifikasjoner
| Merke: | Wasp |
| Kategori: | Strekkodeleser |
| Modell: | WCS3905 |
Trenger du hjelp?
Hvis du trenger hjelp med Wasp WCS3905 still et spørsmål nedenfor, og andre brukere vil svare deg
Strekkodeleser Wasp Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Strekkodeleser Manualer
Nyeste Strekkodeleser Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024