Wasp WLS9500 Bruksanvisning
Wasp
Strekkodeleser
WLS9500
Les nedenfor 📖 manual på norsk for Wasp WLS9500 (41 sider) i kategorien Strekkodeleser. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/41
WandReader
Programming Guide
Please Read
Note:
The Wasp WandReader is ready to scan the most popular
bar codes out of the box. This manual should only be
used to make changes in the conguration of the
scanner for specic applications. This scanner does not
require software or drivers to operate. The scanner enters
data as keyboard data. Please review this manual before
scanning any of the programming bar codes in this manual.
Tech Tip
If you are unsure of the scanner conguration or have
scanned the incorrect codes, please scan the default
bar code on page 6. This will reset the scanner to its
factory settings.
© Copyright Wasp Technologies 2002.
All rights reserved.V4.0.
No part of this publication may be reproduced or transmitted in any form
or by any means without the written permission of Wasp Technologies.
The information contained in this document is subject to change without
notice.
Wasp is a trademark of Wasp Technologies. All other trademarks or registered trademarks are the
property of their respective owners.
Table of Contents
Chapter 1. 1Introduction..............................................................................
Chapter 2. 2Bar Code Symbologies............................................................
Chapter 3. Installation................................................................................3
Chapter 4. Quick Start ..............................................................................4
Chapter 5. WandReader Setup & Conguration ..................................5-28
1. Factory Default & Keyboard Connection....................6
2. Beep and Delay ......................................................7-8
3. Upper/Lower Case......................................................9
4. Keyboard Language ................................................10
5. Preamble/Postamble Conguration..........................11
6. Terminator/Code ID..................................................12
7. Enable/Disable Bar Code Symbologies..............13-14
8. Bar Code Symbology Settings............................15-27
Code 39 ..........................................................15
Interleaved 2 of 5 and Code 93 ......................16
Code 128 and UCC/EAN 128..........................17
MSI/Plessey ....................................................18
Codabar ..........................................................19
UPC-A..............................................................20
UPC-A Supplemental ......................................21
UPC-E..............................................................22
UPC-E Supplemental ......................................23
EAN-8 ..............................................................24
EAN-8 Supplemental ......................................25
EAN-13 ............................................................26
EAN-13 Supplemental ....................................27
Appendix A Bar Code Test Symbols....................................................28-30
Appendix B ASCII Table ......................................................................31-34
Appendix C Codes for PC ........................................................................35
Appendix D Technical Specications ........................................................36
Product Support ....................................................................37
Warranty ................................................................................37
Frequently Asked Questions..................................................38
Produkspesifikasjoner
| Merke: | Wasp |
| Kategori: | Strekkodeleser |
| Modell: | WLS9500 |
Trenger du hjelp?
Hvis du trenger hjelp med Wasp WLS9500 still et spørsmål nedenfor, og andre brukere vil svare deg
Strekkodeleser Wasp Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Strekkodeleser Manualer
Nyeste Strekkodeleser Manualer
16 Oktober 2024
16 Oktober 2024