WyreStorm EXP-CON-H2-DD Bruksanvisning

Les nedenfor 📖 manual på norsk for WyreStorm EXP-CON-H2-DD (8 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/8
EXP-CON- -DD | CON- - -EARC H2 H2 DD
Application Programming Interface
Document
Revision
V1 .0
Document Date
November 2020
Supported
Firmware
Refer to for details. Supported Product Firmware/Software
Copyright © 20 WyreStorm Technologies | 20 WyreStorm.com
CON- - H2 DD API | 201111
2 of 8
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Contents
1. Overview ................................................................................................................................. 3
1.1 Supported Product Firmware/Software ........................................................................................................................ 3
2. Wiring and Communication Conguration 3...........................................................................
2.1 RS-232 Connections ..................................................................................................................................................... 3
3. Command Overview ............................................................................................................... 4
4. Audio Settings ........................................................................................................................ 5
5. EDID Settings ......................................................................................................................... 6
6. General ................................................................................................................................... 7
7. Contacting Technical Support ............................................................................................... 8
8. Document Revision History ................................................................................................... 8
Copyright © 20 WyreStorm Technologies | 20 WyreStorm.com
CON- - H2 DD API | 201111
3 of 8
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
1. Overview
This API (Application Programming Interface) document provides the necessary connections, congurations and
commands needed in order to control the EXP-CON- -DD or CON- - -EARC. Note that some API commands are H2 H2 DD
specic to model.
1.1 Supported Product Firmware/Software
The following products and rmware versions are supported by this version of the API. The rmware versions listed are
the minimum supported at time of publication, rmware may be higher except where otherwise noted.
Product
Status Since Last Doc
Rev
Supported Product
Versions
EXP-CON- - H2 DD
New
V1 or higher
CON- - -EARC H2 DD
New
V1 or higher
2. Wiring and Communication Configuration
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the
switcher. Read through this section in this entirety before running or terminating the wires to ensure proper operation and
to avoid damaging equipment.
2.1 RS-232 Connections
The following wiring diagrams show the pinouts for the WyreStorm device. While not shown, connect the TX (transmit) to
RX (receive) pins at the control system or PC side of the cable. Most control systems and computers are congured for
Digital Terminal Equipment (DTE) where pin 2 is RX and pin 3 is TX This can vary from device to device, refer to the
documentation for the connected device for pin functionally to ensure that the connect connections can be made.
RS-232 Port Settings
57600 bps
8bits
None
1bit
None

Produkspesifikasjoner

Merke: WyreStorm
Kategori: Ikke kategorisert
Modell: EXP-CON-H2-DD

Trenger du hjelp?

Hvis du trenger hjelp med WyreStorm EXP-CON-H2-DD still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert WyreStorm Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer