Audio-Technica AT881TL/RC Bruksanvisning

Les nedenfor 📖 manual på norsk for Audio-Technica AT881TL/RC (2 sider) i kategorien Mikrofon. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Description
The AT881TL/RC requires a phantom power supply of 11–52V DC for the element. Output is low-
impedance balanced. The signal appears across the red and yellow wires; audio ground is the
shield connection. Output is phased so that positive acoustic pressure produces positive voltage
on the yellow wire. The small-diameter black and blue wires are the contact closure. The white
wire is the LED control.
The element in the microphone is shock mounted. The Line-cardioid polar pattern of the element
provides a 90°angle of acceptance. The AT881TL/RC is designed with integral wind-screens to
ensure maximum security against wind noise and plosives.
The microphone features a rubber switch, programmable external contact closure and LED
indicator. The microphone's external contact closure capability permits control of remote devices.
The contact closure is configured to operate independently of the microphone element for
applications that require a constant signal from the element. The LED can be controlled from an
external source.
The microphone is enclosed in a sturdy metal housing with a low-reflectance black finish. Its base
is a desk stand that connected with a 1 meter cable permanently attached to microphone. The
blue and black wires of cable used for contact closure is Closed when pressed or Opened when
not pressed. The white wire of cable used for indicator lights red when logic high (+5V DC) and
white when logic low (0V DC).
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for
extended periods. Extremely high humidity should also be avoided.
Features
Designed for high-quality sound reinforcement, conferencing, professional recording
and other demanding sound pickup applications.
Line-cardioid condenser microphone with power module.
Switch logic output permits control of remote devices from builtin rubber switch.
Integral, phantom-powered, Red LED indicator.
Integral windscreens ensure ultimate security against wind noise and plosives.
Sturdy metal housing design with ball-in-socket base permits flexible positioning.
Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to
the microphones.
Specifications
Element Back electret condenser
Polar pattern Line-cardioid (Unidirectional)
Frequency response 20-20,000 Hz
Open circuit sensitivity -31 dB (28.2 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum input sound level 126 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise ratio >69 dB, 1 kHz at 1 Pa
Phantom power requirements 11-52V DC, 2 mA typical
Switch contact closure Closed circuit in switch pressed;
Opened circuit when not pressed
LED input
Maximum input voltage
Red light up when high (+5V DC), Unlit when low (0V DC),
-0.5V to 5.5V
Weight 1.12 kg
Dimensions 214 mm - long,
227 mm - Max. height,
102 mm - Width
Cable 1.0 m long (permanently attached to microphone),
Output connector Unterminated
polar pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Audio-Technica Corp. Machida Tokyo Japan 2019 OCT FORM No. ATGC-L0371-19-E
mic output:
Black: control ground
White: LED control
Blue: contact closure
Red: cold(-)
Yellow: hot(+)
Shield: audio ground
Optional Accessories:
ATUC-50IU Integration unit for the ATUC-50
conference system
Desktop Line-cardioid Condenser Microphone (with Remote Switching and LED)
AT881TL/RC
AT881TL/RC 的供电模组使用11V 52V 的幻像供电工作,低阻抗的平衡音
频输出,音频信号以红色和黄色的空接线输出,而光身屏蔽线则为地线
(音频)连接。输出相位将以正相位电平设于黄色的空接线上。黑色和蓝
线线LED 显示灯外接控制。
话筒内配置有超指向的收音头,可以提供90° 收音角度,AT881TL/RC
话筒设有无噪开关,可经外部触点开关控制远程设备,及LED
无噪开关可连接外置器材,能以话筒上的开关作遥距控制。LED 显示灯
话筒外壳为全金属结构,话筒底部以活动滑珠固定在底座上,可灵活调
校收音位置,并配有减低环境噪声及风声的防风罩。底座接有1 长固
定式话筒线,色 线, 按
状态 而在无按下时为断路 而白色接线 LED 显示灯外接控制,
接上高电位时(直流+5V)为红色;低电位时(直流0V
)
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱,应避免将话
筒留在日晒的地方或长时间置于温度超过43°C湿
技术指标
20-20,000 Hz
-31 dB (28.2 mV) 1V 1 Pa
100
最大承受声压
126 dB , 1 kHz 1% T.H.D.
>69 dB, 1kHz 1 Pa
11-52V, 2 mA
按下时保持导通;无按下时为断路
LED
(+5V) /
(0V)
-0.5V 5V
1.22
214 mm - ,
227 mm - ,
102 mm -
线
1 ) (
声压曲线1刻度5 dB
频率
10 dB
20k10k5k2k1k50020010050
电平
频率 (赫兹)
响应电平 (dB)
平直
台式超指向性电容话筒(LED)
AT881TL/RC
设计于公共广播、会议、专业录音、电视广播及其他特别要求的
超指向性收音设计,并提供供电放大器电路。
无噪式开关,能经内置开关作远程设备的逻辑控制。
L ED
整合了双网层防风罩,可减低环境噪声及风声。
话筒以活动滑珠固定在底座上,可将收音头灵活调校到任何位
压铸成型的底座和橡胶底垫,能减低碰撞平面时产生的敲击声及
黑色: 控制地线
白色: LED 显示控制
蓝色: 外接开关
红色: 反相位电平
黄色: 正相位电平
屏蔽: 音频地线
选择配件:
ATUC-50IU - 数字会议系统ATUC-50的嵌
入式单元。
FORM No. ATGC-L0371-19-CAudio-Technica Corp. Machida Tokyo Japan 2019 OCT

Produkspesifikasjoner

Merke: Audio-Technica
Kategori: Mikrofon
Modell: AT881TL/RC

Trenger du hjelp?

Hvis du trenger hjelp med Audio-Technica AT881TL/RC still et spørsmål nedenfor, og andre brukere vil svare deg




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer