Audio-Technica ATM230 Bruksanvisning

Les nedenfor 📖 manual på norsk for Audio-Technica ATM230 (2 sider) i kategorien Mikrofon. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
ATM230
Hypercardioid Dynamic Instrument Microphone
FORM No. ATGC-L0333-16-E
Machida Tok yo Japan
polar pattern
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
8 kHz
200 Hz
1 kHz
5 kHz
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Specifications
Element Dynamic
Polar pattern Hypercardioid
Frequency response 30-12,000 Hz
Open circuit sensitivity -54 dB
(1.9 mV) re 1V at 1 Pa
Impedance 600 ohms
Weight 292 g
Dimensions 82.5 mm - long,
38.0 mm - maximum diameter
Output connector Integral 3-pin XLRM-type
Accessories furnished AT8665 drum mount for 5/8"-27 threaded
adapter;
5/8"-27 to 3/8"-16 threaded adapter;
Soft protective pouch
Features
Description
The ATM230 is a dynamic microphone with a hypercardioid polar pattern. It
is designed specically for musical instrument pickup in the studio and on
stage.
The hypercardioid polar pattern of the microphone is more sensitive to
sound originating directly in front of the element, making it useful for
controlling feedback and reducing pickup of unwanted sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing and is outtted with an
integral 5/8"-27 threaded stand clamp. The included AT8665 drum mount
screws into the stand clamp to permit mounting of the ATM230 to the rim
of a drum. A soft protective pouch is also included.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2
and 3; Pin 1 is ground (shield). Output phase is Pin 2 hot”- positive acoustic
pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 4 C for extended periods. Extremely high humidity
should also be avoided.
Take care to keep foreign particles from entering the windscreen. An
accumulation of iron or steel filings on the diaphragm, and/or foreign
material in the windscreen's mesh surface, can degrade performance.
FORM No. ATGC-L0333-16-C
Machida Tok yo Japan
特别为收录来自架子鼓及落地鼓、小军鼓及其他敲击乐器的声音
能处理近距离及非常高的声压收音
超心形指向性设计,减低旁边及后方的噪声干扰,提高收音目标
以稀土磁体结构,能改善输出和瞬间响应
低调的设计使话筒可不显眼地在套鼓的周围设置
坚固的全金属结构,可确保在现场演出和演播室应用时的可靠性
整合的5/8"-27螺纹话筒架,可配合附属的鼓框㚒使用,以便把
ATM230是一枚超心形指向性动圈话筒,专为录音棚和舞台上的乐
器收音而设计。
话筒的超心形指向性设计,能为前端的声音作更敏感收音,是直接
和音源引起感应的重要元素,有利于控制反馈和减少不必要的声音
AT M 2 3 0 封 装 在 一 个 坚 固 的 外 壳 中 , 并 整 合 了 5 / 8 " - 2 7 螺 纹 话 筒
架 , 附属 的 的 AT 8 6 6 5 鼓 框㚒 可 直 接 安装 到 话 筒上 , 再 能 将话 筒 安
装到鼓边,另外亦附有软质保护存放袋。
XL R M
卡农公头的2号及3号针脚输出,而1号针脚则为地线(屏蔽)连接。
输出相位将以正相位电平设于2号针脚上。
为避免出现相位相互抵消而失真的情况,所有话筒连接时,接线必
1-12-23-3
避免将话筒留在日晒或长时间置于温度超过43°C的地方,而极高
湿度也应避免。
小心不要把金属碎或铁屑掉进防风罩内,铁屑会吸进收音头磁铁
中,或贴在防风罩内,将会影响及减低收音效果。
技术指标
收音头
指向特性
超心形指向性
频率响应
30-12,000 Hz
开通灵敏度
-54 dB (1.9 mV) 1V 1 Pa
输出阻抗
600
(线)
292
外形尺寸
82. - , 38. - 5 mm 0 mm
输出连接器
XLRM-3
附属品
AT8665 5/8 -27 "
5/8 -273/8 -16" "
ATM230
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
8 kHz
200 Hz
1 kHz
5 kHz
声压曲线1刻度5 dB
频率
10 dB
20k10k5k2k1k50020010050
电平
频率 (赫兹)
响应电平 (dB)
平直

Produkspesifikasjoner

Merke: Audio-Technica
Kategori: Mikrofon
Modell: ATM230

Trenger du hjelp?

Hvis du trenger hjelp med Audio-Technica ATM230 still et spørsmål nedenfor, og andre brukere vil svare deg




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer