Festo DADP-TU-F3-50 Bruksanvisning

Festo Ikke kategorisert DADP-TU-F3-50

Les nedenfor 📖 manual på norsk for Festo DADP-TU-F3-50 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Stopper cylinder DFST-...-G2 Operating
Tab. 1
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended use
Control of toggle lever functions on stopper cylinder DFST-...-G2.
3 Product overview
3.1 Product Range Overview
3.1.1 Scope of delivery
1Locking plate (1x)
2Leg spring (1x)
3Screw (1x)
M4x10
4Split washer (2x)
5Sleeve (1x)
6Pin (2x)
7Hexagon head screw (1x)
8Washer (1x)
9Screw (1x)
M4x15
10 Sleeve (1x)
Fig. 1
3.1.2 Not in scope of delivery
11 Stopper cylinder (1x)
DFST-...-G2
Fig. 2
3.2 Functions
Lever locking mechanism
This function fixes the toggle lever in the upper end position after it is pushed
through when stopping an object.
When the piston rod of the stopper cylinder is retracted, the toggle lever is
unlocked.
Lever deactivating mechanism
This function deactivates the stopping function after the toggle lever has been
manually pressed down.
When the piston rod of the stopper cylinder is retracted, the toggle lever is
unlocked.
4 Mounting
4.1 Assembly
The assembly alternatives for the pins determine the function.6
Lever locking mechan
ism
Lever deactivating mech
anism
Lever locking and lever
deactivating mechanism
Tab. 2 Assembly alternatives
Fig. 3 Positioning pins
1. Slide the pins into the corresponding slot for the locking plate .6 1
2. Position the pins in the clevis foot (A).6
Fig. 4 Fixing the locking plate
Slide the block[B] under the locking plate .1
ÄPins are fixed.6
DADPTUF3 50 63 80
X [mm] 30 30 43
Tab. 3 Height of block[B]
8107268
DADPTUF350/63/80
Toggle lever function kit
8107268
2019-04
[8107270]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Fig. 5 Positioning the leg spring
1. Position the leg spring on the hole for the locking plate .2 1
2. Insert the sleeve into the hole for the locking plate and leg spring .aJ 1 2
3. Position the short shank[C] of the leg spring under the clevis foot[A].2
Fig. 6 Fixing the leg spring
Slightly tighten the screw with a split washer into the clevis foot[A].9 4
Fig. 7 Tensioning the leg spring
Press the long shank[D] of the leg spring under the lug[E].2
ÄLeg spring is tensioned.2
Fig. 8 Mounting the locking plate
1. Insert the sleeve into the hole.5
2. Tighten the screw with a split washer . Tightening torque:1.5Nm3 4
3. Tighten screw . Tightening torque:1.5Nm9
4. Remove block[B].
Fig. 9 Mounting the stop
Tighten the screw with the washer in the stopper cylinder . Comply7 8 aA
with the tightening torque.
DADPTUF3 50 63 80
Tightening torque Nm 2.5 6 6
Tab. 4 Tightening torques
5 Operation
Lever locking mechanism
Use this function to keep the toggle lever securely in the end position defined at
the back. This prevents the object from sliding back through the installed shock
absorber, e.g. to carry out the relevant work steps on the object.
Fig. 10 Lever locking mechanism
Press the toggle lever[F] through the transported material into the upper end
position.
ÄThe pin clicks audibly into the notch on the toggle lever[F].6
NOTICE!
Breakage of components when toggle lever is locked
Elements of the stopper cylinder or the toggle lever function kit can break when
the toggle lever is actively locked.
Do not move objects backwards against the locked toggle lever.
Fig. 11 Risk of breakage when toggle lever is locked
Lever deactivating mechanism
Use this function to lock the toggle lever into the lower end position. The trans-
ported material can be moved back and forth in both directions over the deactiv-
ated stopper cylinder, e.g. to eliminate a system error.
Fig. 12 Lever deactivating mechanism
Press the toggle lever[F] downwards into the end position.
ÄThe pin clicks audibly into the notch on the toggle lever[F].6
Lever unlocking mechanism
Unlock the locked toggle lever as follows and reactivate the stopping function.
Fig. 13 Lever unlocking mechanism
Pressurise the stopper cylinder so that the piston rod retracts.aA
ÄContact with the screw causes the toggle lever to unlock.7
6 Disassembly
Disassembly is performed in the reverse order to assembly.
CAUTION!
Leg spring under tension
The leg spring can crush or scratch fingers and body parts during disassembly.
Use a tool to carefully release the tension of the leg spring.

Produkspesifikasjoner

Merke: Festo
Kategori: Ikke kategorisert
Modell: DADP-TU-F3-50

Trenger du hjelp?

Hvis du trenger hjelp med Festo DADP-TU-F3-50 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Festo Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer