Joy-it SBC-LCD16x2 Bruksanvisning

Joy-it Følge SBC-LCD16x2

Les nedenfor 📖 manual på norsk for Joy-it SBC-LCD16x2 (9 sider) i kategorien Følge. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/9
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
16X2 LCD MODULE
I2C serial
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. USE
Connecting the display
Connect the display to the pins of your Arduino like shown in the picture
or rather in the chart.
Arduino® Uno 16 x 2 LCD
GND GND
5 V VCC
SDA SDA
SCL SCL
This picture was made in .Fritzing
Note
On the back of the display, besides the connections, there is a potentio-
meter and a jumper.
The potentiometer is used to adjust the contrast of the display and by
removing the jumper, you can permanently turn o the display's
backlight.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
Installation of the library
Before you can transfer the code example to your Arduino, you must
install first the additional library .LiquidCrystal_I2C
This library allows you an easy and fast usage of the display.
Therefore, open the library manager on your Arduino soware.
Search now in the library manager for the library and LiquidCrystal_I2C
install it.

Produkspesifikasjoner

Merke: Joy-it
Kategori: Følge
Modell: SBC-LCD16x2

Trenger du hjelp?

Hvis du trenger hjelp med Joy-it SBC-LCD16x2 still et spørsmål nedenfor, og andre brukere vil svare deg




Følge Joy-it Manualer

Følge Manualer

Nyeste Følge Manualer