Joy-it SBC-OLED01 Bruksanvisning

Joy-it Følge SBC-OLED01

Les nedenfor 📖 manual på norsk for Joy-it SBC-OLED01 (7 sider) i kategorien Følge. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
OLED DISPLAY 128X64
SBC OLED01-
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
2. I2C ADRESSE
On the backside of the OLED display is a resistor, with which you can set
the I2C address of the display to 0x3D. In the delivery state, the display is
accessible via the I2C address 0x3C.
To do change the address, re solder the resistor marked in the figure.-
3. USAGE WITH ARDUINO
3.2 Code example
Before you can transfer the code example to your Arduino using your
Arduino IDE, you must first install the additional libraries Adafruit GFX
Library Adafruit_SSD1306 (released under the BSD License) and
(released under the ) from BSD License Adafruit.
These libraries allow you to use the display as easily and quickly as pos-
sible. You can search for and install them under
Sketch
Include Library
Manage Libraries
.
You can download our code examples . You can upload the code to here
your Arduino using the button. Make sure that you have selected Upload
Port Board and correctly under
Tools
.
3.1 Connection
OLED Arduino Voltage translator
GND GND GND
VCC VCCb 5V
- 3,3 V VCCa
- A5 B2
SCL - A2
- A4 B1
SDA - A1
i

Produkspesifikasjoner

Merke: Joy-it
Kategori: Følge
Modell: SBC-OLED01

Trenger du hjelp?

Hvis du trenger hjelp med Joy-it SBC-OLED01 still et spørsmål nedenfor, og andre brukere vil svare deg




Følge Joy-it Manualer

Følge Manualer

Nyeste Følge Manualer