PDP Pro FS Bruksanvisning

PDP Kontroller Pro FS

Les nedenfor 📖 manual på norsk for PDP Pro FS (7 sider) i kategorien Kontroller. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
CONFIDENTIAL & PROPRIETARY: Information of Victrix may not be used, copied or disclosed without the prior written permission Victrix. ©Victrix. All products are for presentation purposes only - designs pending licensor approval.of final
Victrix Pro FS
PCB Replacement Guide
Step 1: Disconnect Main Tw
Step 1: Disconnect Main Tw
Step 1: Disconnect Main Tw
Step 1: Disconnect Main TwStep 1: Disconnect Main Two Wire Harness
o Wire Harness
o Wire Harness
o Wire Harnesso Wire Harnesses
es
es
eses
a) The larger wiring
harness for the
buttons has two
locking tabs that push
outward to release.
The connector should
then pull straight up.
b) The smaller wiring
harness for the JLF
should simply pull
straight up and be
disconnected.
Step
Step
Step
Step Step 2: Remo
2: Remo
2: Remo
2: Remo2: Removing t
ving t
ving t
ving tving the Back
he Back
he Back
he Backhe Back Cover
Cover
Cover
Cover Cover
a) A series a 7
small/medium Philips
head screws will need
to be removed.
b) Once all screws are
loosened/removed,
the whole plastic
cover can pull up to be
removed (make sure
the 2 locking tabs
from the previous step
have been
closed/locked to allow
the cover to come up)

Produkspesifikasjoner

Merke: PDP
Kategori: Kontroller
Modell: Pro FS

Trenger du hjelp?

Hvis du trenger hjelp med PDP Pro FS still et spørsmål nedenfor, og andre brukere vil svare deg