Proaim CM-ACKG-02 Bruksanvisning
Les nedenfor 📖 manual på norsk for Proaim CM-ACKG-02 (4 sider) i kategorien Stativ. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/4
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Acon King Sucon Mount Car Camera Rigging -8”
System (CM ACKG 02) - -
A s s e m b l y M a n u a l
2x 8''Sucon Cup
3 x 6'' pipe with 48mm OD 2x Safety Straps
5 x 360° Rotang Speed Rail Clamp 2 x Washer
Flight Case
Bolt and 5mm Allen Key
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
2
• Press the hidden buon on the bumper panel
in the front of the vehicle, and remove it, as
shown in the image.
• Loosen and remove the washer from the 6''
pipe quickly with the help of a 5mm Allen key.
• Insert a toe hook into the
(Not included)
hidden panel and ghten it correctly.
NOTE: The toe hook's purpose is to help you
set up your setup easily.
6'' pipe with 360° Rail Clamp Setup
• Now, place one washer on the top of the toe
hook such that their holes align with each
other. Screw in the other washer from the
boom.
• Now, loosen the 360° rotang speed rail
clamp and aach one end to the 6" pipe.
• Insert the washer screw into the 6" pipe, then
ghten them properly with the help of a 5mm
Allen key.
3
• Insert the rod into the other
(Not Included)
end of the speed rail clamp and ghten it
correctly with the help of a 5mm Allen key.
• Place your sucon cup in the selected posion
on the car surface. Next, press the sucon
pump to create a vacuum between the
sucon cup and the car surface. Finally,
release the pump to mount the sucon cup
properly.
• Insert the 6" pipe on the sucon cup into one
end of the 360° rotang speed rail clamp.
Then, insert a rod into the
(Not included)
other end of the clamp.
• Although the sucon cup holding force is
adequate for regular driving shots, you must
use safety belts/tension straps for addional
security. When mounted on cars, properly
secure the objects aached to the sucon cup
(e.g. camera, gimbal, etc.). Use rubber sleeves
to avoid dents and scratches on car paint.
Tighten safety straps carefully to prevent
damages.
• Aer inserng the rod, ghten the clamp
properly with the help of a 5mm Allen key.
Sucon Cup Setup
To guarantee proper adhesion of sucon cups, check that the cup surfaces & mounng surface is clean,
dry & dust free. Please mount it on smooth, even & non porous surfaces. - -
Produkspesifikasjoner
| Merke: | Proaim |
| Kategori: | Stativ |
| Modell: | CM-ACKG-02 |
Trenger du hjelp?
Hvis du trenger hjelp med Proaim CM-ACKG-02 still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Proaim Manualer
8 Desember 2024
24 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Stativ Manualer
- Stativ Hama
- Stativ Neewer
- Stativ Godox
- Stativ Kogan
- Stativ DJI
- Stativ Sony
- Stativ Vello
- Stativ Manfrotto
- Stativ Kodak
- Stativ Celly
- Stativ Sachtler
- Stativ IOptron
- Stativ Tiltall
- Stativ Square Jellyfish
- Stativ Libec
- Stativ Gravity
- Stativ Alpine
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ Stalco
- Stativ Auray
- Stativ SteadiCam
- Stativ ARRI
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
- Stativ IFootage
- Stativ Cartoni
- Stativ HPRC
- Stativ Really Right Stuff
- Stativ Rollei
- Stativ FeiyuTech
Nyeste Stativ Manualer
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
3 Januar 2025
31 Desember 2025
31 Desember 2025
27 Desember 2024
27 Desember 2024
27 Desember 2024