Proaim P-G-PM Bruksanvisning

Proaim Stativ P-G-PM

Les nedenfor 📖 manual på norsk for Proaim P-G-PM (7 sider) i kategorien Stativ. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/7
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Power Sucon Mount Camera Gripper (P G )- -PM
A s s e m bl y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
2 x Sucon Cups
2 x Ropes
2 x Ropes Hooks
Camera Mounng
Plaorm
3 x Bowl Head
100mm Bowl
Adapter
3 x Sucon Cups with Cap
9 x Aluminum Rods
(Size: 30cm,15cm,7.5cm)
2 x Camera Mounng Bolts
(Size: 2 x 1/4” & 3/8”)
1 x L Type -
Allen Key (Size:4mm)
2
Camera Mount Gripper Setup
Remove the cap from the Sucon Cup, and
you will see thread located in the center, 1/4”
as shown in the image.
Remove the dust cover and posion the
sucon cup wherever required.
Screw in the Ball Tilt Head on sucon cups.
Adjustable Ball Tilt Heads allow for an
extensive range of lockable posions for
Aluminum Rods.
Pull and then remove the cap of the
aluminum rod (30cm).
Similarly, mount all the Ball Tilt heads onto
the sucon cups.
Press down the sucon cup and keep pushing
the pump to rmly x it on the surface.
Repeat this process for all the sucon cups.
Cauon: Recheck the Pump every 90 minutes.
If the red line is visible, Re pump the cup -
without losing the remaining vacuum ll the
Red Line disappears.
3 x Dierent Assembly Aluminum Rods
3
Screw the other end of the aluminum rod
(30cm) onto the Ball Tilt head, and then
ghten it.
First loosen the knob, then set the posion of
the Aluminum rods and nally secure them by
ghtening the knobs.
Screw the rods into the camera mounng
plaorm and ghten them.
Firstly, remove the dust cover and place your
sucon cup on the selected place and press
down to x the pump rmly on the surface.
Remove the cap of the aluminum rod (15cm),
then screw and ghten it properly onto the
Ball Tilt head. Repeat the same process for
aaching the other aluminum rods.
NOTE: Three rods are provided for each length
(30cm,15cm,7.5cm). These rods can be linked
together in any combinaon you need to create
the perfect setup.

Produkspesifikasjoner

Merke: Proaim
Kategori: Stativ
Modell: P-G-PM

Trenger du hjelp?

Hvis du trenger hjelp med Proaim P-G-PM still et spørsmål nedenfor, og andre brukere vil svare deg


Stativ Proaim Manualer

Proaim

Proaim VI-GLDE-01 Bruksanvisning

3 April 2025
Proaim

Proaim P-MLAK-01 Bruksanvisning

2 April 2025
Proaim

Proaim LV-SCFH-01 Bruksanvisning

2 April 2025
Proaim

Proaim P-G-PM Bruksanvisning

2 April 2025
Proaim

Proaim P-OHCR-01 Bruksanvisning

2 April 2025
Proaim

Proaim P-LLBT-MTCL Bruksanvisning

2 April 2025
Proaim

Proaim P-TNGO-01 Bruksanvisning

2 April 2025
Proaim

Proaim CST-100-01 Bruksanvisning

13 Januar 2025
Proaim

Proaim P-ORGH-MN Bruksanvisning

13 Januar 2025
Proaim

Proaim P-LLBT-150 Bruksanvisning

7 Januar 2025

Stativ Manualer

Nyeste Stativ Manualer

Leofoto

Leofoto LH-40 Bruksanvisning

4 April 2025
Leofoto

Leofoto LH-25 Bruksanvisning

4 April 2025
Leofoto

Leofoto XB-32 Bruksanvisning

4 April 2025
Leofoto

Leofoto Urban RF-284CT Bruksanvisning

4 April 2025
Leofoto

Leofoto Ranger RF-324C Bruksanvisning

4 April 2025
Leofoto

Leofoto Ranger RF-224C Bruksanvisning

4 April 2025
Oben

Oben CT-3431 Bruksanvisning

3 April 2025
Oben

Oben AC-1451 Bruksanvisning

3 April 2025
Glide Gear

Glide Gear G2H 100 Bruksanvisning

3 April 2025
Kern

Kern SFB-A01 Bruksanvisning

2 April 2025