Proaim P-MLAK-01 Bruksanvisning
Les nedenfor 📖 manual på norsk for Proaim P-MLAK-01 (9 sider) i kategorien Stativ. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/9
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m bl y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Mul Adapter Kit (Mitchell Euro/Elemac Bowl) - - (P MLAK- -01)
1 x Mitchell plate 1 x Adapter Plate
1 x Bowl adapter
Size: 100 mm
1 x Euro Flange
1 x Mitchell
Lock
1x Euro Adapter
Clamping
knob
4 x Distance Rods
1 x Spanner (Size:13)
2 x L Type Allen Key -
(Size:5mm & 6mm)
1 x Bowl adapter
Size: 150 mm
Allen Bolts
(8 x 50mm=3pc)
(6 x 25mm=12pc) Allen Bolts
(6 x 12mm=6pc) Allen Bolts
2
Mul Adapter Kit Setup
• Attach the Euro Flange by matching it with the
thread of the Adapter Plate and then insert
the bolt.
• Secure all the bolts by tightening them using
the Allen Key.
• Attach the Distance Rods by matching them
with the side thread on the Adapter Plate and
then secure them using the Allen Key.
• Attach all the Distance Rods on the Adapter
Plate, as shown in the image. Place the
100mm bowl adapter by matching it with the
threads of the Rods.
Hard Case
Bowl Euro -
3
• After placing the 100mm bowl adapter on the
rods, then match the thread and insert the
bolts.
• Tighten the bolt using the Allen Key, so that
bowl euro can be attached properly.
Mitchell Euro -
• Attach the distance rods at equal distance
from each other, as shown in the image.
NOTE: You can aach rods on the mulple
threads of the Adapter Plate according to your
setup requirement.
• Attach the Distance Rods on the Adapter Plate
at equal distance from each other according
to your requirement and then secure them
with the help of the bolt.
• Place the Mitchell Plate by matching it with
the thread of the Distance Rods and then
insert the bolt by matching it with the thread
hole.
• Properly tighten the bolt of the Mitchell Plate
using the Allen Key.
Produkspesifikasjoner
| Merke: | Proaim |
| Kategori: | Stativ |
| Modell: | P-MLAK-01 |
Trenger du hjelp?
Hvis du trenger hjelp med Proaim P-MLAK-01 still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Proaim Manualer
3 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
13 Januar 2025
13 Januar 2025
7 Januar 2025
Stativ Manualer
- Stativ Bauhn
- Stativ Hama
- Stativ Neewer
- Stativ Godox
- Stativ Kogan
- Stativ DJI
- Stativ Sony
- Stativ Vello
- Stativ Asus
- Stativ Pyle
- Stativ Manfrotto
- Stativ Kodak
- Stativ Laserliner
- Stativ Kern
- Stativ Celly
- Stativ Revo
- Stativ Sachtler
- Stativ IOptron
- Stativ Nikon
- Stativ Tiltall
- Stativ Omnitronic
- Stativ MOZA
- Stativ Square Jellyfish
- Stativ Libec
- Stativ Gravity
- Stativ Alpine
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ Stalco
- Stativ Auray
- Stativ SteadiCam
- Stativ ARRI
- Stativ Explore Scientific
- Stativ Fidlock
- Stativ Bresser
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
- Stativ IFootage
- Stativ Benro
- Stativ Cam Caddie
- Stativ MotoCrane
- Stativ Sky-Watcher
- Stativ Cartoni
- Stativ HPRC
- Stativ Really Right Stuff
- Stativ Vixen
- Stativ Oben
- Stativ Ruggard
- Stativ Rollei
- Stativ Ready Rig
- Stativ Axler
- Stativ FeiyuTech
- Stativ ProMediaGear
- Stativ Dorr
- Stativ Redrock Micro
- Stativ Velbon
- Stativ 3 Legged Thing
- Stativ FLM
- Stativ Block & Block
- Stativ Sirui
- Stativ Falcon Eyes
- Stativ Induro
- Stativ Lowel
Nyeste Stativ Manualer
3 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025