Proaim P-TNGO-01 Bruksanvisning

Proaim Stativ P-TNGO-01

Les nedenfor 📖 manual på norsk for Proaim P-TNGO-01 (6 sider) i kategorien Stativ. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/6
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Tango 360° Camera Rotang Dutch Angle Rig (P TNGO- -01)
A s s e m b l y M a n u a l
Camera Plaorm
Tango 360° Camera Rotang Dutch Angle Rig
Camera Plaorm Rods with Stopper
1.5mm L
Type Allen Key
2
Loosen and remove the stopper of the camera
plaorm rods, as shown in the picture.
Loosen and remove the stoppers from the
camera plaorm rods, as shown in the
picture.
Tango 360° Rig Setup
Insert the rods into the camera plaorm and
then secure them properly using a 1.5mm
Allen key. Follow the same process on the
other side as well.
Loosen the red knob of the Tango 360°
camera rotang Dutch angle rig and then
insert it into the rods.
Follow the same process on other side.
Aer inserng the rods into the camera
plaorm hole, insert the stoppers from the
boom and ghten them to secure properly.
3
Aer inserng it into the rods, secure it
properly with the help of the red knob and
then secure the rods properly from the top
with the help of stoppers.
Properly aach the Ball Head (Not Included)
to the tripod, by matching it with the 3/8”
thread of the Tripod.
NOTE: Tripod comes with a (1/4” & 3/8”) quick
tripod mounng threads.
Remove the camera plate as shown.
Camera Setup
To give the Ball Head a 360° rotaon, loosen
the knob a lile and then rotate the knob to
ghten it again. To remove the Camera Plate,
loosen the knob.
Aach the camera plate to the boom
mounng thread of tango dutch angle rig 1/4”
and secure it with the help of an Allen key.
Rods are properly secured via stopper.

Produkspesifikasjoner

Merke: Proaim
Kategori: Stativ
Modell: P-TNGO-01

Trenger du hjelp?

Hvis du trenger hjelp med Proaim P-TNGO-01 still et spørsmål nedenfor, og andre brukere vil svare deg




Stativ Proaim Manualer

Stativ Manualer

Nyeste Stativ Manualer