Proaim P-LLBT-150 Bruksanvisning
Les nedenfor 📖 manual på norsk for Proaim P-LLBT-150 (6 sider) i kategorien Stativ. Denne guiden var nyttig for 12 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
HD 150mm Bowl Baby Camera Tripod Stand w
Lever Fricon and Aluminum Spreader (P LLBT- - -150)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
HD 150mm Bowl Baby Camera Tripod Stand
with Lever Fricon
Spanner Size: 13mm
Aluminium Spreader
A s s e m b ly Ma n u a l
2
Aluminum Spreader Setup
• Extend the Spreader on the oor and loosen
all three knobs.
NOTE: The Spreader aaches to the spiked legs
of the spreader to provide precise customizaon
of the tripod's length and stability.
• Aer loosening the knobs, extend the
Spreader per your requirement.
• You can lock the posion using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16 to 66cm/26” ”
radius, oering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
3
• Loosen all three adjustment knobs to set the
desired height of the Stand.
NOTE: One stage telescopic design with fricon -
knob extends up to 6 inches to capture
low angle shots, and conversely, it can be easily -
extended up to 34 inches for greater elevaon.
• Aer seng the height, ghten the knobs to
secure the Stand, as shown in the image.
NOTE: Locking pins on each leg secures the
adjusted height, prevenng them from
retracng under load.
• Unlock the red knob to adjust the Tripod s legs ’
according to your requirement.
• Aer adjusng the Tripod legs, re-lock the
knob, as shown in the image.
• Mount the Tripod on the aluminum Spreader
by equally aligning them.
• Aer mounng the Tripod, properly secure it
using the rubber gripper.
150mm Bowl Baby Camera Tripod Stand Setup
Produkspesifikasjoner
| Merke: | Proaim |
| Kategori: | Stativ |
| Modell: | P-LLBT-150 |
Trenger du hjelp?
Hvis du trenger hjelp med Proaim P-LLBT-150 still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Proaim Manualer
13 Januar 2025
13 Januar 2025
7 Januar 2025
8 Desember 2024
24 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Stativ Manualer
- Stativ Bauhn
- Stativ Hama
- Stativ Neewer
- Stativ Godox
- Stativ Kogan
- Stativ DJI
- Stativ Sony
- Stativ Vello
- Stativ Asus
- Stativ Pyle
- Stativ Manfrotto
- Stativ Kodak
- Stativ Laserliner
- Stativ Celly
- Stativ Revo
- Stativ Sachtler
- Stativ IOptron
- Stativ Nikon
- Stativ Tiltall
- Stativ Omnitronic
- Stativ MOZA
- Stativ Square Jellyfish
- Stativ Libec
- Stativ Gravity
- Stativ Alpine
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ Stalco
- Stativ Auray
- Stativ SteadiCam
- Stativ ARRI
- Stativ Explore Scientific
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
- Stativ IFootage
- Stativ Benro
- Stativ Cam Caddie
- Stativ MotoCrane
- Stativ Sky-Watcher
- Stativ Cartoni
- Stativ HPRC
- Stativ Really Right Stuff
- Stativ Oben
- Stativ Ruggard
- Stativ Rollei
- Stativ Ready Rig
- Stativ Axler
- Stativ FeiyuTech
- Stativ ProMediaGear
- Stativ Redrock Micro
- Stativ Velbon
- Stativ 3 Legged Thing
- Stativ FLM
- Stativ Block & Block
Nyeste Stativ Manualer
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
12 Mars 2025
25 Februar 2025