Sonneman Lithe 3453 Bruksanvisning

Sonneman Lettelse Lithe 3453

Les nedenfor 📖 manual på norsk for Sonneman Lithe 3453 (2 sider) i kategorien Lettelse. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/2
©2023 SONNEMAN - A Way of Light
Assembly Instructions
Lithe
Product Information
and Warnings
3453, 3454, 3456, 3458
3' Wall Lamp
4' Wall Lamp
6' Wall Lamp
8' Wall Lamp
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un électricien qualié pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove or bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.
Instructions D'Installation
Multiple U.S. and foreign patents pending.
Assembly Instructions
to the necessary length of black wire (not included)
to reach the xture location.
6. Feed the red and black extension wires through the
drilled hole (A).
7. Using drywall anchors and screws or other appropriate
hardware, attach the mounting plate (D) so that the
center hole of the mounting plate coincides with the
drilled hole (A) and the plate is level. Make sure the red
and black extension wires extend through the hole in
the mounting plate.
8. Using the included wire nuts, connect the positive
(red) wire to the xture's positive (+) conductor and
the negative (black) wire to the xture's negative (-)
conductor. Carefully insert these connections and any
excess wire into the wall through the drilled hole (A).
9. Fit the main xture body (C) over the mounting plate (D)
so that the tabs (F) t inside the slots in the back of the
1. Note: This xture must be installed with its power
supply in a remote, accessible location in accordance
with local electrical code.
2. Shut o power to the branch circuit.
3. Remove the xture screws (E) from the main xture body
(C) and set aside. Separate the main xture body from
the mounting plate (D).
4. Determine the xture location and drill a 3/4" hole (A) at
the centerpoint of the xture.
5. The power supply (B) must be installed in a remote
and accessible location near the xture location in
accordance with local electrical code (Fig. 1). Make
appropriate electrical connections:
a. Connect the power supply’s live wire to the live
supply wire.
b. Connect the power supply’s neutral wire to the
neutral supply wire.
c. Connect the power supply's postiive (+) output wire
to the necessary length of red wire (not included) to
reach the xture location.
d. Connect the power supply's negative (-) output wire
Care Instructions:
Use a clean, dry cloth when dusting.
To protect the nish, avoid any harsh
abrasives or chemicals.
Note:
• This xture is dimmable with Electronic Low Voltage (Trailing-Edge)
type dimmers, Incandescent (Leading-Edge) type dimmers, and
0-10V type dimmers only.
(C)
(A)
(D)
(F)
Fig. 1
(B)
3456
3454
3458
(E)
(F)
(E)
3453
main xture body. Re-insert and
tighten the xture screws (E).
10. Restore power to the outlet box.

Produkspesifikasjoner

Merke: Sonneman
Kategori: Lettelse
Modell: Lithe 3453

Trenger du hjelp?

Hvis du trenger hjelp med Sonneman Lithe 3453 still et spørsmål nedenfor, og andre brukere vil svare deg


Lettelse Sonneman Manualer

Sonneman

Sonneman Fino Duo 3779 Bruksanvisning

3 April 2025
Sonneman

Sonneman Turo 3442 Bruksanvisning

3 April 2025
Sonneman

Sonneman QB 7520 Bruksanvisning

3 April 2025
Sonneman

Sonneman Turo 3441 Bruksanvisning

3 April 2025
Sonneman

Sonneman Lithe 3453 Bruksanvisning

3 April 2025
Sonneman

Sonneman Lithe 3466 Bruksanvisning

3 April 2025
Sonneman

Sonneman Suspenders SLS0157 Bruksanvisning

2 Januar 2025
Sonneman

Sonneman Suspenders SLS0164 Bruksanvisning

2 Januar 2025

Lettelse Manualer

Nyeste Lettelse Manualer

V-Tac

V-Tac VT-995 Bruksanvisning

7 April 2025
WAC Lighting

WAC Lighting WS-W33118 Bruksanvisning

6 April 2025
WAC Lighting

WAC Lighting DS-WD06 Bruksanvisning

6 April 2025
WAC Lighting

WAC Lighting WS-23018 Bruksanvisning

6 April 2025
WAC Lighting

WAC Lighting DS-WD08 Bruksanvisning

6 April 2025
V-Tac

V-Tac VT-1055 Bruksanvisning

6 April 2025
WAC Lighting

WAC Lighting WS-W33125 Bruksanvisning

6 April 2025
WAC Lighting

WAC Lighting DS-WS06 Bruksanvisning

6 April 2025
Canarm

Canarm Bryant IOL598BK Bruksanvisning

6 April 2025
Dainolite

Dainolite V166-1W Bruksanvisning

6 April 2025