Sonneman Lithe 3466 Bruksanvisning
Les nedenfor 📖 manual på norsk for Sonneman Lithe 3466 (3 sider) i kategorien Lettelse. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/3

©2023 SONNEMAN - A Way of Light
Assembly Instructions
Lithe
Product Information
and Warnings
3463, 3464, 3466, 3468
3' Pendant
4' Pendant
6' Pendant
8' Pendant
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un électricien qualié pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove or bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.

Instructions D'Installation
Multiple U.S. and foreign patents pending.
Assembly Instructions
Adjust the steel cable to the desired height: To
shorten the cable, push the cable up and it will lock
automatically. To lengthen the cable, lift up on the
cable and push up on the plunger lock (H). While
keeping the plunger lock depressed, lower the
cable to the desired length. Release the plunger
lock to set.
6. Fit the canopy (G) over the mounting plate (B), tucking
the power supply, power cord, and any loose wires
inside. Use the two canopy screws (I) to fasten the
canopy to the mounting plate.
7. If necessary, make any nal adjustments to the
hanging length of the power cord and/or steel cable.
Once the position is nal, trim the steel cable where it
exits the cable hanger.
8. Restore power to the outlet box.
1. Shut o power to the outlet box (A).
2. Attach the mounting plate (B) to the outlet box (A)
with the outlet box screws (C).
3. Determine the location of the cable hanger (D) based
on the desired orientation of the xture and the
distance between the hanging points. Attach the
cable hanger base to the ceiling using appropriate
hardware. Screw the main body of the cable hanger
onto the base.
4. Make appropriate electrical connections to the power
supply (E) using wire nuts:
a. Connect the power supply’s live wire to the live
supply wire.
b. Connect the power supply’s neutral wire to the
neutral supply wire.
c. Connect the xture’s ground wire (green or
uncoated) to the ground supply wire. If no ground
wire is present in the outlet box, connect the
xture's ground wire to the mounting plate (B)
using the green screw (included).
5. Determine height at which the xture is to be hung.
a. Adjust the power cord to the desired length: Use
the screwdriver to loosen the slotted set screw (F).
Adjust length of power cord. Tighten the set screw
to set. Reserve extra cord in the canopy (G).
b. Insert the steel cable into the cable hanger (D).
Care Instructions:
Use a clean, dry cloth when dusting.
To protect the nish, avoid any harsh
abrasives or chemicals.
Note:
• This xture is dimmable with Electronic Low Voltage (Trailing-Edge)
type dimmers, Incandescent (Leading-Edge) type dimmers, and
0-10V type dimmers only.
(G)
(B)
(C)
(I)
(A)
(D)
3466
(F)
(H)
(E)
3463
3468
3464

If eld-cutting is required,
please follow these instructions:
1. Make a 1” slice along the length of the cord's outer jacket (Fig. 1).
CAUTION: Do not cut through the outer braided conductor.
2. Carefully strip the outer jacket of the cord and keep the outer
braided conductors intact (Fig. 1).
3. Slide the outer braided conductor back to create a bulge
and reveal the inner stranded conductor (Fig. 2).
4. Bend the cord to create an opening through the bunched-up
portion of outer braided conductor, then pull out the inner
stranded conductor (Fig. 3)
5. Twist together the outer braided conductor to form the negative
wire of the xture, then strip 5/8” o the end of the inner stranded
conductor to form the positive wire of the xture (Fig. 4).
6. Re-splice all power cords.
Appendix A
Inner Stranded Conductor
End
View
Insulation
Outer Jacket
Outer Braided Conductor
FAILURE TO FOLLOW THESE
INSTRUCTIONS WILL VOID THE WARRANTY
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Outer Braided
Conductor
Outer Jacket
Insulated Stranded
Conductor
Insulated
Stranded
Conductor
Negative Wire
(Outer Braided Conductor)
Positive Wire
(Insulated Stranded
Conductor)
Coaxial Power Cord:
Coax Splicing
©2023 SONNEMAN - A Way of Light
Assembly Instructions
Produkspesifikasjoner
Merke: | Sonneman |
Kategori: | Lettelse |
Modell: | Lithe 3466 |
Trenger du hjelp?
Hvis du trenger hjelp med Sonneman Lithe 3466 still et spørsmål nedenfor, og andre brukere vil svare deg
Lettelse Sonneman Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

2 Januar 2025

2 Januar 2025
Lettelse Manualer
- Lettelse Stamos
- Lettelse ORNO
- Lettelse Ledlenser
- Lettelse Bosch
- Lettelse AFX
- Lettelse DeWalt
- Lettelse Hama
- Lettelse Neewer
- Lettelse Hazet
- Lettelse Philips
- Lettelse Schwaiger
- Lettelse Godox
- Lettelse IKEA
- Lettelse TP Link
- Lettelse Razer
- Lettelse Kogan
- Lettelse Behringer
- Lettelse GoGEN
- Lettelse Nitecore
- Lettelse Kichler
- Lettelse Trust
- Lettelse Integral LED
- Lettelse Lutec
- Lettelse Golden Lighting
- Lettelse ET2
- Lettelse Quoizel
- Lettelse Crystorama
- Lettelse Brennenstuhl
- Lettelse Varaluz
- Lettelse FIAP
- Lettelse Aputure
- Lettelse Media-tech
- Lettelse NEO Tools
- Lettelse Gemini
- Lettelse Westinghouse
- Lettelse Canarm
- Lettelse Klein Tools
- Lettelse Schneider
- Lettelse Dainolite
- Lettelse Tesy
- Lettelse Martin
- Lettelse EMOS
- Lettelse Sharper Image
- Lettelse Fluval
- Lettelse Ryobi
- Lettelse Nanlite
- Lettelse BeamZ
- Lettelse Steinel
- Lettelse Maxim
- Lettelse Brandson
- Lettelse Aplic
- Lettelse CSL
- Lettelse Bearware
- Lettelse Moen
- Lettelse NUVO
- Lettelse Maginon
- Lettelse Milwaukee
- Lettelse OttLite
- Lettelse Be Cool
- Lettelse Ansmann
- Lettelse Showtec
- Lettelse Busch + Müller
- Lettelse V-Tac
- Lettelse Infinity
- Lettelse Nedis
- Lettelse Elation
- Lettelse Magmatic
- Lettelse Chauvet
- Lettelse Karma
- Lettelse TFA
- Lettelse Weeylite
- Lettelse Black Diamond
- Lettelse Lumie
- Lettelse WAC Lighting
- Lettelse ESYLUX
- Lettelse Livarno Lux
- Lettelse Omnitronic
- Lettelse Eurolite
- Lettelse Casalux
- Lettelse Innoliving
- Lettelse Aqara
- Lettelse Beghelli
- Lettelse Middle Atlantic
- Lettelse Rosco
- Lettelse DeSisti
- Lettelse American DJ
- Lettelse Astera
- Lettelse EXO
- Lettelse Novy
- Lettelse Profoto
- Lettelse Claypaky
- Lettelse GRE
- Lettelse Ikan
- Lettelse Ring
- Lettelse Impact
- Lettelse Olight
- Lettelse Perel
- Lettelse Blackburn
- Lettelse Sigma
- Lettelse Rayzr 7
- Lettelse Excello
- Lettelse Vimar
- Lettelse Genaray
- Lettelse Altman
- Lettelse Setti+
- Lettelse Kanlux
- Lettelse ARRI
- Lettelse Osram
- Lettelse Light4Me
- Lettelse GlobalTronics
- Lettelse Lume Cube
- Lettelse Digipower
- Lettelse ETC
- Lettelse Fiilex
- Lettelse Bresser
- Lettelse Portman
- Lettelse ColorKey
- Lettelse Litepanels
- Lettelse Perfect Christmans
- Lettelse Yamazen
- Lettelse Lexon
- Lettelse XQ-Lite
- Lettelse Govee
- Lettelse Peerless-AV
- Lettelse Heitronic
- Lettelse Obsidian
- Lettelse Blizzard
- Lettelse LUPO
- Lettelse Enttec
- Lettelse Fotodiox
- Lettelse GVM
- Lettelse Amaran
- Lettelse Halo
- Lettelse HQ Power
- Lettelse Currey & Company
- Lettelse Kino Flo
- Lettelse Cateye
- Lettelse Maxxmee
- Lettelse Wiesenfield
- Lettelse Sun Joe
- Lettelse Angler
- Lettelse Raya
- Lettelse Dracast
- Lettelse Luxli
- Lettelse Elan
- Lettelse Livex Lighting
- Lettelse Eglo
- Lettelse Hinkley Lighting
- Lettelse Underwater Kinetics
- Lettelse Rollei
- Lettelse Ranex
- Lettelse Sea&Sea
- Lettelse Fuzzix
- Lettelse COLBOR
- Lettelse DMT
- Lettelse Lucide
- Lettelse LumenRadio
- Lettelse DIO
- Lettelse Paulmann
- Lettelse Melinera
- Lettelse Sagitter
- Lettelse Yongnuo
- Lettelse Audibax
- Lettelse Qazqa
- Lettelse Mazda
- Lettelse Triton Blue
- Lettelse Singercon
- Lettelse Hudson Valley
- Lettelse Forte Lighting
- Lettelse Smith-Victor
- Lettelse Zylight
- Lettelse Light & Motion
- Lettelse Cineo
- Lettelse Prolycht
- Lettelse AD Trend
- Lettelse Aveo Engineering
- Lettelse Intellytech
- Lettelse Trio Lighting
- Lettelse DCW
- Lettelse Kinotehnik
- Lettelse Rotolight
- Lettelse GLP
- Lettelse SLV
- Lettelse Quasar Science
- Lettelse Kuzco
- Lettelse Schonbek
- Lettelse Lowel
Nyeste Lettelse Manualer

7 April 2025

6 April 2025

6 April 2025

6 April 2025

6 April 2025

6 April 2025

6 April 2025

6 April 2025

6 April 2025

6 April 2025