Sonneman Suspenders SLS0157 Bruksanvisning

Sonneman Lettelse Suspenders SLS0157

Les nedenfor 📖 manual på norsk for Sonneman Suspenders SLS0157 (8 sider) i kategorien Lettelse. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/8
suspenders®
assembly instructions
A delicately scaled, modular system of interconnected elements and suspended LED luminaires.
SLS0157
September 6, 2017
©2017 SONNEMAN - A Way of Light 1 of 7
Suspenders® Product Information and Warnings
Important
• Always disconnect the power before installing or replacing Luminaires and before cleaning or
other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
• Please read all included assembly instructions and warnings carefully before installation. Contact Customer
Service if you have any questions or concerns. Before installation, please conrm that the xture is compatible
with your supply voltage and dimming system, if present.
• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory sealed
compartments, and avoid touching the LEDs with your hands or any object.
• Although all our xtures are equipped with protective devices, LED electronic systems are vulnerable to power
surges and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC
systems.
• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not replace or
substitute with another power supply.
• Remote Transformer installation must be done by a licensed electrician and in accordance with local building
and electrical codes. Remote installations should be in an accessible location, as close to the xture as possible.
The appropriate wire gauge must be used to limit the voltage drop to no more than 5%.
• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or wire
them in series.
• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built, and
improper connections may damage the xture.
• Any mounting hardware is provided for your convenience and should be used with discretion. Always use the
appropriate hardware for the mounting surface.
• To avoid excessive voltage drop, the longest electrical path from the Power Feed to the furthest Luminaire
should not exceed 30 feet.
• Suspenders transformers can be loaded up to 80% of their rated wattage. ®
• Suspenders® transformers feature short-circuit protection with automatic recovery, and will resume operation
once the short-circuit condition is removed.
• Suspenders transformers have 24VAC output, and are dimmable with Electronic Low Voltage dimmers ONLY.®
• Suspenders must be installed in dry locations ONLY.®
September 6, 2017
©2017 SONNEMAN - A Way of Light 2 of 7
Configuration
Assembly

Produkspesifikasjoner

Merke: Sonneman
Kategori: Lettelse
Modell: Suspenders SLS0157

Trenger du hjelp?

Hvis du trenger hjelp med Sonneman Suspenders SLS0157 still et spørsmål nedenfor, og andre brukere vil svare deg


Lettelse Sonneman Manualer

Sonneman

Sonneman Suspenders SLS0157 Bruksanvisning

2 Januar 2025
Sonneman

Sonneman Suspenders SLS0164 Bruksanvisning

2 Januar 2025

Lettelse Manualer

Nyeste Lettelse Manualer

COLBOR

COLBOR W60 Bruksanvisning

16 Januar 2025
IKEA

IKEA BLÖTSNÖ 904.211.38 Bruksanvisning

16 Januar 2025
COLBOR

COLBOR W100 Bruksanvisning

16 Januar 2025
AD Trend

AD Trend 83513 Bruksanvisning

16 Januar 2025
COLBOR

COLBOR W60R Bruksanvisning

16 Januar 2025
Nedis

Nedis WIFILS52CRGBW Bruksanvisning

16 Januar 2025
GVM

GVM PR150D Bruksanvisning

15 Januar 2025
GVM

GVM B200C Bruksanvisning

15 Januar 2025
Nedis

Nedis BTTNTP-22W60 Bruksanvisning

15 Januar 2025
Nedis

Nedis BTTNTP-44W120 Bruksanvisning

15 Januar 2025